DFI LANPARTY JR 790GX-M3H5 Living Review

**supershanks** · 23-05-2009 00:04

don't think its's in the stores yet, will be soon.

**supershanks** · 02-06-2009 22:20

Phenom II x4 945 Max stock volt clock 3,225 15x215 @1333 = 1432Mhz 7-7-7-19

Benches

Stability

**supershanks** · 02-06-2009 23:24

Default Phenom II x4 955 Stock Volts 3,600 - 18x200 1600Mhz 8-8-8-21

Benches

Stability

Bios Settings

Code:

DFI LANPARTY JR 790GX-M3H5 
Note:There are 2 Bios modes Easy and Advanced Easy is default use [F9} for advanced items

(shown as *)
Genie Bios Settings
DRAM Configuration Sub Menu  [Press Enter ]
MCT Memory Timing  Sub Menu  [Press Enter ]
MCT Memory Timing...................: [Enabled] 
2T Mode.............................: [Enabled] 
CAS Latency Time....................: 8
Precharge delay (tRAS)..............: 21
DRAM RAS# Precharge.................:8
DRAM RAS#  to CAS# Delay............8:
Bank to Bank Cmd (TRRD).............: 6
TRC.................................:30
TRTP*...............................: 6
Write Recovery (TWR)*...............:10
Write-Read Cmand(TWTR)*............:6
TRFCO...............................: [110.0ns]
TRFC1 ..............................: [110.0ns]
TRFC2 ..............................: [Auto]
TRFC3...............................: [Auto]
Trdrd*..............................: [Auto]
TrwtTO*.............................: [Auto]
Twrrd*..............................: [Auto]
Twrwr*..............................:[Auto]
Bank Swizzle Mode...................: [Enabled]
Auto Tweak Performance..............:[Disabled]
Optimal Performance Mode............:[Disabled]
ODC Control. Sub Menu  [Press Enter]
Output Driver Comp..................:[Auto]
Channel A
CPU On-die Termination..............:[60 ohms +/-20%] 
DOS Drive Strength .................:[1.00x]
Data Drive Strength  ...............:1.00x]
MEMCLK Drive Strength ..............:1.00x]
Addr/Cmd Drive Streng...............:[1.25x][
CS/ODT Drive Strength...............:[1.25x]
CKE Drive Strength..................:[1.25x]
Channel B
CPU On-die Termination..............:[60 ohms +/-20%] 
DOS Drive Strength .................:[1.00x]
Data Drive Strength  ...............:1.00x]
MEMCLK Drive Strength ..............:1.00x]
Addr/Cmd Drive Streng...............:[1.25x][
CS/ODT Drive Strength...............:[1.25x]
CKE Drive Strength..................:[1.25x]
----------------------Dram Configuration--------------------------
DCTs Mode...........................:[Ganged]
CKE base power down mode............: [Enabled]
CKE based power down................: [Per Channel]
------------------Main Genie Menu------------------------
HT Link Control  Sub Menu  [Press Enter ] 
HT Link Width *.....................:[Auto]
HI Link Tristate*...................:[Auto]
UnitiD Clumping......................:[Auto] 
------------------Main Genie Menu------------------------
CPU Feature........... Sub Menu  [Press Enter ]
AMD ClE Support.....................:[Disabled]
Advanced Clock Calibration..........: [Disabled]
Value  (All Cores)) - ..............:-2% 
x Value (Core 8)....................: -2% 
x Value (Core 2)....................: - 2% 
x Value (Core 1)....................: - 2% 
x Value (Core 3)....................: -2% 
Secure Virtual Machine Mod..........: [Disabled]
AND Family lOH Down core............:[Auto]
AND CPU stepping....................: P0
------------------Main Genie Menu------------------------
Memory Current Value Mhz............: 1,600Mhz.
Timing Mode.........................:[Manual]
Memory Clock value or Limit.........:[DDR3 1600]
AMD KB Cool&Quiet control...........:[Disabled] 
CPU Clock Ratio.....................: x18
CPU NB Vlotage......................:[Auto]
CPU NB Clock Ratio..................: x10
HT Link Frequency...................: 2000
CPU VId Special Add mv..............:[Auto] 
DRAM Voltage Control................: 1.635v
NB HT Voltage.......................:1.30v
NB Core Voltage.....................:1.40v
NB PCIE Voltage.....................:1.10v
SB PLL 1.2V Voltage.................:1.20v
Side Port Voltage...................:1.60v
O.C. Fail retry Counter.............:1
O.C. Fail CMOS Reload...............:[Disabled] 
Spread Spectrum.....................: [Disabled] 
CPU Host/HTT Boot Up Clock..........: 200
CPU HostHTT Clock...................: 200
CPU Host.HTT  Adjust Gap............: 5
PCIE Clock..........................: 100

**Pastie** · 02-06-2009 23:42

Near enough identical to the 955 scores in the DFI DK 790 FXB-M3 H5 @ 3.6 Ghz Shanks

**supershanks** · 03-06-2009 00:57

aye pretty well as you'd expect. I did get a few mhz higher on the 945 clock JR v DK, on the highest htt on base volts, though it was only 2~3Mhz.

**Pastie** · 03-06-2009 16:50

Are you running crossfire or single card Shanks ?

**supershanks** · 03-06-2009 18:46

El cheapo crossfire

2x4670 works pretty well. Might upgrade to 2x ATI Radeon™ HD 4770 when the 1gb models start appearing

**supershanks** · 05-06-2009 21:02

3,690Mhz 18x205 @1600 =1,640Mhz 7-7-7-21
Having got 3.6Ghz stable thought i'd try upping Htt a bit.

Bench

Stability

Bios Settings

Code:

DFI LANPARTY JR 790GX-M3H5 
Note:There are 2 Bios modes Easy and Advanced Easy is default use [F9} for advanced items

(shown as *)
Genie Bios Settings
DRAM Configuration Sub Menu  [Press Enter ]
MCT Memory Timing  Sub Menu  [Press Enter ]
MCT Memory Timing...................: [Manual] 
2T Mode.............................:[Enabled] 
CAS Latency Time....................:7
Precharge delay (tRAS)..............: 21
DRAM RAS# Precharge.................:7
DRAM RAS#  to CAS# Delay............:7
Bank to Bank Cmd (TRRD).............: 4
TRC.................................:26
TRTP*...............................: 4
Write Recovery (TWR)*...............:8
Write-Read C'mand(TWTR)*............:4
TRFCO...............................: [110.0ns]
TRFC1 ..............................: [110.0ns]
TRFC2 ..............................: [110.0ns]
TRFC3...............................: [110.0ns]
Trdrd*..............................: [Auto]
TrwtTO*.............................:[Auto] 
Twrrd*..............................: [Auto]
Twrwr*..............................:[Auto]
ODC Control. Sub Menu  [Press Enter]
Output Driver Comp..................:[Auto]
Channel A
CPU On-die Termination..............:[240 ohms +/-20%]
DOS Drive Strength .................:[1.00x]
Data Drive Strength  ...............:[1.00x]
MEMCLK Drive Strength ..............:[1.00x]
Addr/Cmd Drive Streng...............:[1.50x]
CS/ODT Drive Strength...............:[1.50x]
CKE Drive Strength..................:[1.50x]
Channel B
DOS Drive Strength .................:[1.00x]
Data Drive Strength  ...............:[1.00x]
MEMCLK Drive Strength ..............:[1.00x]
Addr/Cmd Drive Streng...............:[1.50x]
CS/ODT Drive Strength...............:[1.50x]
CKE Drive Strength..................:[1.50x]
----------------------Dram Configuration--------------------------
DCTs Mode................................:[Unganged]
CKE base power down mode.........: [Enabled]
CKE based power down................: [Per Channel]
Memory Hole Remapping...............:[Enabled]
Auto Optimise Bottom IO..............:[Enabled]
Bottom of [31:24] IO Space.........:[D0]
Bottom of UMA  Dram [31:24].......:[FC]
------------------Main Genie Menu------------------------
HT Link Control  Sub Menu  [Press Enter ] 
HT Link Width *.....................:[Auto]
HI Link Tristate*...................:[Auto]
UnitiD Clumping.....................:[Auto] 
------------------Main Genie Menu------------------------
CPU Feature........... Sub Menu  [Press Enter ]
AMD ClE Support.....................:[Disabled]
Advanced Clock Calibration..........: [Disabled]
Value  (All Cores)) - ...............: -2%
x Value (Core 8)....................: -2% 
x Value (Core 2)....................: - 2% 
x Value (Core 1)....................: - 2% 
x Value (Core 3)....................: -2% 
Secure Virtual Machine Mod..........: [Disabled]
AND Family lOH Down core............:[Quad]
AND CPU stepping....................: P0
------------------Main Genie Menu------------------------
Memory Current Value Mhz............: 1,640 Mhz.
Timing Mode.........................:[Manual]
Memory Clock value or Limit.........:[DDR3 1600]
AMD KB Cool&Quiet control...........:  [Disabled]
CPU NB Vlotage......................:[Auto]
CPU Clock Ratio.....................: x18
CPU NB Clock Ratio..................: x9
HT Link Frequency...................: 1800
CPU VId Special Add mv............:+75mv
DRAM Voltage Control..............: 1.837v
NB HT Voltage.......................:1.20v
NB Core Voltage.....................:1.40v
NB PCIE Voltage.....................:1.10v
SB PLL 1.2V Voltage.................:1.16v
Side Port Voltage...................:1.60v
O.C. Fail retry Counter.............:1
O.C. Fail CMOS Reload...............: [Disabled]
Spread Spectrum.....................: [Disabled]
CPU Host/HTT Boot Up Clock..........: 200
CPU HostHTT Clock...................: 205
CPU Host.HTT  Adjust Gap............: 5
PCIE Clock..........................: 103

**Pastie** · 05-06-2009 22:12

What do you reckon it's going to top out at Shanks ?

**supershanks** · 06-06-2009 00:05

3,800Mhz 19x200 DDR3-1600 7-7-7-21

Bench

Stability

Bios Settings

Code:

DFI LANPARTY JR 790GX-M3H5 
Note:There are 2 Bios modes Easy and Advanced Easy is default use [F9} for advanced items

(shown as *)
Genie Bios Settings
DRAM Configuration Sub Menu  [Press Enter ]
MCT Memory Timing  Sub Menu  [Press Enter ]
MCT Memory Timing...................: [Manual] 
2T Mode.............................:[Enabled] 
CAS Latency Time....................:7
Precharge delay (tRAS)..............: 21
DRAM RAS# Precharge.................:7
DRAM RAS#  to CAS# Delay............:7
Bank to Bank Cmd (TRRD).............: 4
TRC.................................:26
TRTP*...............................: 4
Write Recovery (TWR)*...............:8
Write-Read C'mand(TWTR)*............:4
TRFCO...............................: [110.0ns]
TRFC1 ..............................: [110.0ns]
TRFC2 ..............................: [110.0ns]
TRFC3...............................: [110.0ns]
Trdrd*..............................: [Auto]
TrwtTO*.............................:[Auto] 
Twrrd*..............................: [Auto]
Twrwr*..............................:[Auto]
ODC Control. Sub Menu  [Press Enter]
Output Driver Comp..................:[Auto]
Channel A
CPU On-die Termination..............:[240 ohms +/-20%]
DOS Drive Strength .................:[1.00x]
Data Drive Strength  ...............:[1.00x]
MEMCLK Drive Strength ..............:[1.00x]
Addr/Cmd Drive Streng...............:[1.50x]
CS/ODT Drive Strength...............:[1.50x]
CKE Drive Strength..................:[1.50x]
Channel B
DOS Drive Strength .................:[1.00x]
Data Drive Strength  ...............:[1.00x]
MEMCLK Drive Strength ..............:[1.00x]
Addr/Cmd Drive Streng...............:[1.50x]
CS/ODT Drive Strength...............:[1.50x]
CKE Drive Strength..................:[1.50x]
----------------------Dram Configuration--------------------------
DCTs Mode................................:[Unganged]
CKE base power down mode.........: [Enabled]
CKE based power down................: [Per Channel]
Memory Hole Remapping...............:[Enabled]
Auto Optimise Bottom IO..............:[Enabled]
Bottom of [31:24] IO Space.........:[D0]
Bottom of UMA  Dram [31:24].......:[FC]
------------------Main Genie Menu------------------------
HT Link Control  Sub Menu  [Press Enter ] 
HT Link Width *.....................:[Auto]
HI Link Tristate*...................:[Auto]
UnitiD Clumping.....................:[Auto] 
------------------Main Genie Menu------------------------
CPU Feature........... Sub Menu  [Press Enter ]
AMD ClE Support.....................:[Disabled]
Advanced Clock Calibration..........: [All Cores]
Value  (All Cores)) - ...............: 0%
x Value (Core 8)....................: 0% 
x Value (Core 2)....................: 0% 
x Value (Core 1)....................: 0% 
x Value (Core 3)....................:  0% 
Secure Virtual Machine Mod..........: [Disabled]
AND Family lOH Down core............:[Quad]
AND CPU stepping....................: P0
------------------Main Genie Menu------------------------
Memory Current Value Mhz............: 1,600 Mhz.
Timing Mode.........................:[Manual]
Memory Clock value or Limit.........:[DDR3 1600]
AMD KB Cool&Quiet control...........:  [Disabled]
CPU NB Vlotage......................:[Auto]
CPU Clock Ratio.....................: x19
CPU NB Clock Ratio..................: [Auto]
HT Link Frequency...................: [Auto]
CPU VId Special Add mv............:+75mv
DRAM Voltage Control..............: 1.815v
NB HT Voltage.......................:1.30v
NB Core Voltage.....................:1.40v
NB PCIE Voltage.....................:1.10v
SB PLL 1.2V Voltage.................:1.26v
Side Port Voltage...................:1.60v
O.C. Fail retry Counter.............:1
O.C. Fail CMOS Reload...............: [Disabled]
Spread Spectrum.....................: [Disabled]
CPU Host/HTT Boot Up Clock..........: 200
CPU HostHTT Clock...................: 200
CPU Host.HTT  Adjust Gap............: 5
PCIE Clock..........................: 103

Thread: DFI LANPARTY JR 790GX-M3H5 Living Review

Phenom II x4 945 Max stock volt clock

Default Phenom II x4 955 Stock Volts 3,600 - 18x200 1600Mhz 8-8-8-21

Thanked By:

3,690Mhz 18x205 @1600 =1,640Mhz 7-7-7-21

3,800Mhz 19x200 DDR3-1600 7-7-7-21

LinkBacks (?)

Tags for this Thread

Posting Permissions