Go Back   Clunk's Forums. > Product Reviews. > Reviews.
Reload this Page Gigabyte GA-EP45-EXTREME Living Review

Reply
Page 43 of 51 « First 3336373839404142 43 44454647484950 Last »
 
LinkBack (48) Thread Tools Display Modes

  #421  
Old 18-04-2009, 18:16
Mafio's Avatar
Member
Mafio's System Specs
 
Join Date: Nov 2008
Location: Montecarlo
Posts: 91
Thanks: 0
Thanked 7 Times in 6 Posts
Default
Quote:
Originally Posted by supershanks View Post
Not sure I'd have the nerve
Any improvement ?
more than 10 degrees in less at parity of voltage and frequency.
Reply With Quote

  #422  
Old 18-04-2009, 19:03
supershanks's Avatar
Super Moderator
supershanks's System Specs
 
Join Date: Sep 2007
Location: Hamilton - Scotland
Posts: 4,527
Thanks: 4
Thanked 320 Times in 276 Posts
Default
Quote:
Originally Posted by Mafio
more than 10 degrees in less at parity of voltage and frequency.
that't cool
Reply With Quote

  #423  
Old 29-04-2009, 20:07
Mafio's Avatar
Member
Mafio's System Specs
 
Join Date: Nov 2008
Location: Montecarlo
Posts: 91
Thanks: 0
Thanked 7 Times in 6 Posts
Default
CPU-Z Validator 3.0

657.5mhz of fsb all at air with multiplier a 7x

guys this mobo really kick ass

Bios Settings
Code:
GIGABYTE GA-EP45_EXTREME
[u]MB Intelligent Tweaker(M.I.T.)
Robust Graphics Booster ...............: [Auto]
CPU Clock Ratio ..........................: 7
Fine CPU Clock Ratio.....................:.+0.0
CPU Frequency ...........................: 4,602Mhz
Clock Chip Control 
Standard Clock Control
CPU Host Clock Control..................: [Enabled] 
CPU Host Frequency (Mhz) ............:657Mhz
PCI Express Frequency (Mhz) .........:101Mhz
C.I.A. 2.......................................: Disabled
Advanced Clock Control [Press Enter]
CPU Clock Drive...........................:900mv
PCI Express Clock Drive.................:800mv
CPU Clock Skew (ps)....................: 400ps
MCH Clock Skew (ps)...................: 300ps
DRAM Performance Control
Performance Enhance...................: [Turbo]
Extreme Memory Profile (X.M.P.).....: Disabled
(G)MCH Frequency Latch...............: 333
System Memory Multiplier ..............: 2.00B
Memory Frequency (Mhz) ..............: 1,315Mhz
DRAM Timing Selectable ................: [Manual] 
Standard Timing Control 
CAS Latency Time........................: 5
tRCD .........................................: 5
tRP'...........................................:  5
tRAS..........................................:  15
Advanced Timing Control [Press Enter]
tRRD...........................................:3
tWTR..........................................:3
tWR............................................:6
tRFC...........................................:42
tRTP...........................................:3
Command Rate (CMD) ....................:Auto
Channel A
Static tRead Value.........................: Auto = 11 //maybe 10 or 9 is possible with higher vmch
 tRD Phase0 Adjustmen...................:Auto
tRD Phase1 Adjustment...................:Auto
 tRD Phase2 Adjustment .................:Auto
 tRD Phase3 Adjustment..................:Auto
Trd2rd(Different Rank)....................:Auto
Twr2wr(Different Rank)...................:Auto
Twr2rd(Different Rank)...................:Auto
Trd2wr(Same/Diff Rank)..................:Auto
Dimm1 Clock Skew Control...............:Auto  ps
Dimm2 Clock Skew Control...............:+300  ps
DDR Write Training ........................: Enable
Channel B
Static tRead Value.........................: Auto = 11
 tRD Phase0 Adjustmen...................:Auto
tRD Phase1 Adjustment...................:Auto
 tRD Phase2 Adjustment .................:Auto
 tRD Phase3 Adjustment..................:Auto
Trd2rd(Different Rank)....................:Auto
Twr2wr(Different Rank)...................:Auto
Twr2rd(Different Rank)...................:Auto
Trd2wr(Same/Diff Rank)..................:Auto
Dimm1 Clock Skew Control...............:Auto
Dimm2 Clock Skew Control...............:+300  ps
DDR Write Training ........................: Enable
{U]Motherboard Voltage Control{/U]
Voltage Type.………... Normal 
CPU
CPU Vcore….……….........................:1.500v
CPU Termination…..... 1.200V*.......: 1.500v
CPU PLL…………………....1.500V*.......: 1.580v
CPU Referen.…………....0.755V*.......: 0.920v
CPU Reference2………,,0.800V*.......:0.930v
MCH/ICH
MCH Core…………….....1.100V...........: 1.500v
MCH Reference….…….0.800V...........; 0.790v
MCH/DRAM Ref.…......0.900V...........: 1.300v
ICH I/O……………….....1.550V............: 1.500v
ICH Core…………...……1.100V............: 1.100v
DRAM
DRAM Voltage ……....1.800V............: 2.600v
DRAM Termination .…0.900V............: 1.300v
Channel A Reference 0.900V............: 1.300v
Channel B Reference 0.900V............: 1.300v
[b]{U]Advanced Settings[b]{U]
Limit CPUID Max. to 3.....................: [Disabled]
No-Execute Memory Protect............: [Disabled]
CPU Enhanced Halt (C1E)................: [Disabled]
C2/C2E State Support....................: [Disabled]
x C4/C4E State Support..................: [Disabled]
CPU Thermal Monitor 2(TM2) ...........: [Enabled]
CPU EIST Function.........................: [Disabled]
Virtualization Technology................: [Disabled]
Reply With Quote

  #424  
Old 29-04-2009, 21:45
supershanks's Avatar
Super Moderator
supershanks's System Specs
 
Join Date: Sep 2007
Location: Hamilton - Scotland
Posts: 4,527
Thanks: 4
Thanked 320 Times in 276 Posts
Default
Nice one
Reply With Quote

  #425  
Old 29-04-2009, 22:13
Mafio's Avatar
Member
Mafio's System Specs
 
Join Date: Nov 2008
Location: Montecarlo
Posts: 91
Thanks: 0
Thanked 7 Times in 6 Posts
Default
thx mate
Reply With Quote

  #426  
Old 09-05-2009, 20:39
Pastie's Avatar
News Team
Pastie's System Specs
 
Join Date: Jan 2009
Location: 'Twixt Greendale & Sodor
Posts: 2,478
Thanks: 230
Thanked 204 Times in 174 Posts
Default
Code:
GIGABYTE GA-EP45_EXTREME
[u]MB Intelligent Tweaker(M.I.T.)
Robust Graphics Booster ...............: Turbo
CPU Clock Ratio ..........................: 8.5
Fine CPU Clock Ratio.....................:. +0.5
CPU Frequency ...........................: 3600Mhz
Clock Chip Control 
Standard Clock Control
CPU Host Clock Control..................: [Enabled] 
CPU Host Frequency (Mhz) ............:424Mhz
PCI Express Frequency (Mhz) .........:100 Mhz
C.I.A. 2......................................: Disabled
Advanced Clock Control [Press Enter]
CPU Clock Drive...........................: 800mv
PCI Express Clock Drive.................: 800mv
CPU Clock Skew (ps)....................: 100ps
MCH Clock Skew (ps)...................: 100ps
DRAM Performance Control
Performance Enhance...................: [Turbo]
Extreme Memory Profile (X.M.P.).....: Disabled
(G)MCH Frequency Latch...............: [Auto]
System Memory Multiplier ..............:2B
Memory Frequency (Mhz) ..............: Mhz
DRAM Timing Selectable ................:[Auto]
Standard Timing Control
CAS Latency Time........................: 
tRCD .........................................: 
tRP...........................................:  
tRAS..........................................:  
Advanced Timing Control [Press Enter]
tRRD...........................................:5
tWTR..........................................:5
tWR............................................:5
tRFC...........................................:15
tRTP...........................................:4
Command Rate (CMD) ....................:Auto

Channel A

Channel A Timings Settings [Press Enter] 
Static tRead Value.........................:Auto
 tRD Phase0 Adjustmen...................:Auto
tRD Phase1 Adjustment...................:Auto
 tRD Phase2 Adjustment .................:Auto
 tRD Phase3 Adjustment..................:Auto
Trd2rd(Different Rank)....................:Auto 
Twr2wr(Different Rank)...................:Auto 
Twr2rd(Different Rank)...................:Auto 
Trd2wr(Same/Diff Rank)..................:Auto 
Dimm1 Clock Skew Control...............:Auto  ps
Dimm2 Clock Skew Control...............:Auto  ps

Channel A Driving Settings [Press Enter] 
Driving Strength Profile:[AUTO],[667Mhz],[800Mhz],[1066Mhz],[OC-1200],[OC-1333]

Data Driving Pull-Up Level.............:Auto 
Cmd Driving Pull-Up Level..............:Auto 
Ctrl Driving Pull-Up Level...............:Auto 
Clk Driving Pull-Up Level...............:Auto 

Data Driving Pull-Down Level.........:Auto 
Cmd Driving Pull-Down Level..........:Auto 
Ctrl Driving Pull-Down Level...........:Auto 
Clk Driving Pull-Down Level............:Auto 

Channel B

Channel B Timings Settings [Press Enter] 
Static tRead Value.........................:Auto
 tRD Phase0 Adjustmen...................:Auto
tRD Phase1 Adjustment...................:Auto
 tRD Phase2 Adjustment .................:Auto
 tRD Phase3 Adjustment..................:Auto
Trd2rd(Different Rank)....................:Auto 
Twr2wr(Different Rank)...................:Auto 
Twr2rd(Different Rank)...................:Auto 
Trd2wr(Same/Diff Rank)..................:Auto 
Dimm1 Clock Skew Control...............:Auto  ps
Dimm2 Clock Skew Control...............:Auto  ps
DDR3 Write Training .......................: Enabled
Channel B Driving Settings [Press Enter] 
Driving Strength Profile:[AUTO],[667Mhz],[800Mhz],[1066Mhz],[OC-1200],[OC-1333]

Data Driving Pull-Up Level............:Auto 
Cmd Driving Pull-Up Level............:Auto 
Ctrl Driving Pull-Up Level.............:Auto 
Clk Driving Pull-Up Level..............:Auto 

Data Driving Pull-Down Level............:Auto 
Cmd Driving Pull-Down Level............:Auto 
Ctrl Driving Pull-Down Level.............:Auto 
Clk Driving Pull-Down Level..............:Auto 

{U]Motherboard Voltage Control{/U]
Voltage Type.………... Normal 
CPU
CPU Vcore….……….........................:1.31v
CPU Termination…..... 1.200V*.......: 1.260v
CPU PLL…………………....1.500V*.......: 1.560v
CPU Referen.…………....0.755V*.......: 0.800v
CPU Reference2………,,0.800V*.......:0.838v
MCH/ICH
MCH Core…………….....1.100V...........:1.3vv
MCH Reference….…….0.800V...........; 0.758v
MCH/DRAM Ref.…......0.900V...........: Auto
ICH I/O……………….....1.550V............: Auto
ICH Core…………...……1.100V............: Auto
DRAM
DRAM Voltage ……....1.800V............: 2.2v
DRAM Termination .…0.900V............: Normal
Channel A Reference 0.900V............: Normal
Channel B Reference 0.900V............: Normal
[b]{U]Advanced Settings[b]{U]
Limit CPUID Max. to 3.....................: [Disabled]
No-Execute Memory Protect............: [Disabled]
CPU Enhanced Halt (C1E)................: [Disabled]
C2/C2E State Support....................: [Disabled]
x C4/C4E State Support..................: [Disabled]
CPU Thermal Monitor 2(TM2) ...........: [Enabled]
CPU EIST Function.........................: [Disabled]
Virtualization Technology................: [Disabled]
Note: * refers to 45nm CPU
CPU-Z Validator

3.6Ghz on air with ease

Time to start heading towards 4Ghz now
__________________
Quote:
Politicians simply don't understand computers. If they're not losing CD's or leaving laptops on trains, they're coming up with some nonsense policy which displays their ignorance. Honestly, it's like putting Teletubbies in charge of a thermonuclear reactor. It would be funny if it weren't so frightening.
Reply With Quote

  #427  
Old 09-05-2009, 23:42
supershanks's Avatar
Super Moderator
supershanks's System Specs
 
Join Date: Sep 2007
Location: Hamilton - Scotland
Posts: 4,527
Thanks: 4
Thanked 320 Times in 276 Posts
Default
Nice going Pastie keep it coming
It's nice to see some Yorkfield bios settings, not had too many to share so far
Reply With Quote

  #428  
Old 10-05-2009, 23:17
Pastie's Avatar
News Team
Pastie's System Specs
 
Join Date: Jan 2009
Location: 'Twixt Greendale & Sodor
Posts: 2,478
Thanks: 230
Thanked 204 Times in 174 Posts
Default
Code:
GIGABYTE GA-EP45_EXTREME
[u]MB Intelligent Tweaker(M.I.T.)
Robust Graphics Booster ...............: Turbo
CPU Clock Ratio ..........................: 8.5
Fine CPU Clock Ratio.....................:. +0.5
CPU Frequency ...........................: 3800Mhz
Clock Chip Control 
Standard Clock Control
CPU Host Clock Control..................: [Enabled] 
CPU Host Frequency (Mhz) ............:448Mhz
PCI Express Frequency (Mhz) .........:100 Mhz
C.I.A. 2......................................: Disabled
Advanced Clock Control [Press Enter]
CPU Clock Drive...........................: 800mv
PCI Express Clock Drive.................: 800mv
CPU Clock Skew (ps)....................: 100ps
MCH Clock Skew (ps)...................: 100ps
DRAM Performance Control
Performance Enhance...................: [Turbo]
Extreme Memory Profile (X.M.P.).....: Disabled
(G)MCH Frequency Latch...............: [Auto]
System Memory Multiplier ..............:2B
Memory Frequency (Mhz) ..............: Mhz
DRAM Timing Selectable ................:[Auto]
Standard Timing Control
CAS Latency Time........................: 5
tRCD .........................................: 5
tRP...........................................:  5
tRAS..........................................:  15
Advanced Timing Control [Press Enter]
tRRD...........................................:4
tWTR..........................................:4
tWR............................................:8
tRFC...........................................:50
tRTP...........................................:Auto
Command Rate (CMD) ....................:Auto

Channel A

Channel A Timings Settings [Press Enter] 
Static tRead Value.........................:Auto
 tRD Phase0 Adjustmen...................:Auto
tRD Phase1 Adjustment...................:Auto
 tRD Phase2 Adjustment .................:Auto
 tRD Phase3 Adjustment..................:Auto
Trd2rd(Different Rank)....................:Auto 
Twr2wr(Different Rank)...................:Auto 
Twr2rd(Different Rank)...................:Auto 
Trd2wr(Same/Diff Rank)..................:Auto 
Dimm1 Clock Skew Control...............:Auto  ps
Dimm2 Clock Skew Control...............:Auto  ps

Channel A Driving Settings [Press Enter] 
Driving Strength Profile:[AUTO],[667Mhz],[800Mhz],[1066Mhz],[OC-1200],[OC-1333]

Data Driving Pull-Up Level.............:Auto 
Cmd Driving Pull-Up Level..............:Auto 
Ctrl Driving Pull-Up Level...............:Auto 
Clk Driving Pull-Up Level...............:Auto 

Data Driving Pull-Down Level.........:Auto 
Cmd Driving Pull-Down Level..........:Auto 
Ctrl Driving Pull-Down Level...........:Auto 
Clk Driving Pull-Down Level............:Auto 

Channel B

Channel B Timings Settings [Press Enter] 
Static tRead Value.........................:Auto
 tRD Phase0 Adjustmen...................:Auto
tRD Phase1 Adjustment...................:Auto
 tRD Phase2 Adjustment .................:Auto
 tRD Phase3 Adjustment..................:Auto
Trd2rd(Different Rank)....................:Auto 
Twr2wr(Different Rank)...................:Auto 
Twr2rd(Different Rank)...................:Auto 
Trd2wr(Same/Diff Rank)..................:Auto 
Dimm1 Clock Skew Control...............:Auto  ps
Dimm2 Clock Skew Control...............:Auto  ps
DDR3 Write Training .......................: Enabled
Channel B Driving Settings [Press Enter] 
Driving Strength Profile:[AUTO],[667Mhz],[800Mhz],[1066Mhz],[OC-1200],[OC-1333]

Data Driving Pull-Up Level............:Auto 
Cmd Driving Pull-Up Level............:Auto 
Ctrl Driving Pull-Up Level.............:Auto 
Clk Driving Pull-Up Level..............:Auto 

Data Driving Pull-Down Level............:Auto 
Cmd Driving Pull-Down Level............:Auto 
Ctrl Driving Pull-Down Level.............:Auto 
Clk Driving Pull-Down Level..............:Auto 

{U]Motherboard Voltage Control{/U]
Voltage Type.………... Normal 
CPU
CPU Vcore….……….........................:1.3875v
CPU Termination…..... 1.200V*.......: 1.260v
CPU PLL…………………....1.500V*.......: 1.560v
CPU Referen.…………....0.755V*.......: 0.800v
CPU Reference2………,,0.800V*.......:0.838v
MCH/ICH
MCH Core…………….....1.100V...........:1.30v
MCH Reference….…….0.760V...........; 0.738v
MCH/DRAM Ref.…......0.900V...........: Auto
ICH I/O……………….....1.550V............: Auto
ICH Core…………...……1.100V............: Auto
DRAM
DRAM Voltage ……....1.800V............: 2.24v
DRAM Termination .…0.900V............: Normal
Channel A Reference 0.900V............: Normal
Channel B Reference 0.900V............: Normal
[b]{U]Advanced Settings[b]{U]
Limit CPUID Max. to 3.....................: [Disabled]
No-Execute Memory Protect............: [Disabled]
CPU Enhanced Halt (C1E)................: [Disabled]
C2/C2E State Support....................: [Disabled]
x C4/C4E State Support..................: [Disabled]
CPU Thermal Monitor 2(TM2) ...........: [Enabled]
CPU EIST Function.........................: [Disabled]
Virtualization Technology................: [Disabled]
Note: * refers to 45nm CPU
3.8Ghz Prime stable & rising
__________________
Quote:
Politicians simply don't understand computers. If they're not losing CD's or leaving laptops on trains, they're coming up with some nonsense policy which displays their ignorance. Honestly, it's like putting Teletubbies in charge of a thermonuclear reactor. It would be funny if it weren't so frightening.
Reply With Quote

  #429  
Old 10-05-2009, 23:34
supershanks's Avatar
Super Moderator
supershanks's System Specs
 
Join Date: Sep 2007
Location: Hamilton - Scotland
Posts: 4,527
Thanks: 4
Thanked 320 Times in 276 Posts
Default
nice one mate. have you tried on any of them dropping a 0.5 multi and upping fsb. be interesting to see how it effects your benches.
3600 @ 450 , not sure if 3800 @475 is getting near top of fsb ?
Reply With Quote

  #430  
Old 10-05-2009, 23:45
Pastie's Avatar
News Team
Pastie's System Specs
 
Join Date: Jan 2009
Location: 'Twixt Greendale & Sodor
Posts: 2,478
Thanks: 230
Thanked 204 Times in 174 Posts
Default
Quote:
Originally Posted by supershanks View Post
nice one mate. have you tried on any of them dropping a 0.5 multi and upping fsb. be interesting to see how it effects your benches.
3600 @ 450 , not sure if 3800 @475 is getting near top of fsb ?
Not tried a 0.5 multi as yet - I'm sat at 453x8.5 at the mo - 3.85Ghz ( 475x8.5 = 4037.5Ghz )
I'll see how high this can go on 8.5x , then drop to 8x

temps are sound with the TrUE - 37c idle / 58 load
__________________
Quote:
Politicians simply don't understand computers. If they're not losing CD's or leaving laptops on trains, they're coming up with some nonsense policy which displays their ignorance. Honestly, it's like putting Teletubbies in charge of a thermonuclear reactor. It would be funny if it weren't so frightening.
Reply With Quote
Reply
Page 43 of 51 « First 3336373839404142 43 44454647484950 Last »

« Lian Li PC-Q07 Mini ITX Case Review | DFI LanParty DK P55-T3eH9 Living Review »
Thread Tools
Display Modes
Linear Mode Linear Mode

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

LinkBacks (?)
LinkBack to this Thread: http://www.clunk.org.uk/forums/reviews/7548-gigabyte-ga-ep45-extreme-living-review.html
Posted By For Type Date
Gigabyte GA-EP45-EXTREME - [H]ard|Forum This thread Refback 01-03-2010 22:17
[Sammelthread] Gigabyte (GA-) EP45 Extreme (P45) [2] - Forum de Luxx This thread Refback 23-02-2010 07:42
GA-EP45-EXTREME I E8500 - BENCHforum This thread Refback 21-01-2010 16:39
GA-EP45-EXTREME I E8500 - BENCHforum This thread Refback 21-01-2010 16:05
GA-EP45-EXTREME I E8500 - BENCHforum This thread Refback 21-01-2010 16:00
GIGABYTE GA-EP45-UD3P: New Build - Overclockers Forums This thread Refback 21-01-2010 08:24
GIGABYTE GA-EP45-UD3P: New Build - Overclockers Forums This thread Refback 20-01-2010 09:01
Overclocking with gigabyte EP45 extreme need help - EXTREME Overclocking Forums This thread Refback 20-01-2010 07:53
Overclocking with gigabyte EP45 extreme need help - EXTREME Overclocking Forums This thread Refback 13-01-2010 00:50
Overclocking with gigabyte EP45 extreme need help - EXTREME Overclocking Forums This thread Refback 11-01-2010 16:33
Best current Gigabyte MB for o'clocking Core 2 Quad CPU This thread Refback 08-01-2010 23:38
Gigabyte EP45-Extreme must learn about bios - Overclockers Forums This thread Refback 04-01-2010 05:38
** Official ** Gigabyte UD3 P45 Series -- EP45-UD3 / EP45-UD3R / EP45-UD3P - Page 154 - XtremeSystems Forums This thread Refback 03-01-2010 15:14
Micron D9 GMH\GKX\JKH etc club - Page 62 - XtremeSystems Forums This thread Refback 11-12-2009 23:38
Gigabyte ga-ep45-ud3P motherboard - Page 3 - [H]ard|Forum This thread Refback 25-11-2009 13:23
Gigabyte EP45 Extreme - AnandTech Forums This thread Refback 03-11-2009 22:49
[Sammelthread] Gigabyte (GA-) EP45 Extreme (P45) [2] - Forum de Luxx This thread Refback 10-10-2009 23:41
Question re this mobo. This thread Refback 04-10-2009 21:05
Gigabyte EP45 EXTREME motherboard startup problem This thread Refback 01-10-2009 08:28
PurePC.pl - Forum Dyskusyjne > E8200+gigabyte Ep-45 Ds4 I Granica 3,6 Ghz This thread Refback 28-09-2009 17:59
GA EP45-Extreme (DDR2) Hits 665mhz fsb in air. - Page 3 - XtremeSystems Forums This thread Refback 28-09-2009 15:28
[TOPIC UNIQUE] Présentation de la GA-EP45-Extreme This thread Refback 26-09-2009 00:52
GA EP45-Extreme (DDR2) Hits 665mhz fsb in air. - Page 2 - XtremeSystems Forums This thread Refback 23-09-2009 23:33
3DCenter Forum - Gigabyte EP45 Extreme F8 und Q9550 E0 übertakten This thread Refback 15-09-2009 19:21
AnandTech - Gigabyte EP45 Extreme This thread Refback 14-09-2009 02:22
3DCenter Forum - Gigabyte GA-EP45-Extreme-Aktion von Conrad (Split aus Schnäppchen-Thread) - Seite 6 This thread Refback 13-09-2009 19:10
Gigabyte ga-ep45-ud3P motherboard - Page 3 - [H]ard|Forum This thread Refback 13-09-2009 08:35
3DCenter Forum - Gigabyte GA-EP45-Extreme-Aktion von Conrad (Split aus Schnäppchen-Thread) - Seite 6 This thread Refback 12-09-2009 23:49
[Thread Ufficiale] Gigabyte DS3 Series & GA-EP45 Extreme - Intel P45 - Hardware Upgrade Forum This thread Refback 05-09-2009 19:52
[Thread Ufficiale] Gigabyte GA-EP45 Extreme - Intel P45 - Hardware Upgrade Forum This thread Refback 04-09-2009 09:53
AnandTech - Gigabyte EP45 Extreme This thread Refback 29-08-2009 15:48
Gigabyte EP45 EXTREME motherboard startup problem This thread Refback 28-08-2009 01:41
Gigabyte EP45 EXTREME motherboard startup problem This thread Refback 27-08-2009 22:11
** Official ** Gigabyte UD3 P45 Series -- EP45-UD3 / EP45-UD3R / EP45-UD3P - Page 154 - XtremeSystems Forums This thread Refback 07-08-2009 17:22
GA EP45-Extreme (DDR2) Hits 665mhz fsb in air. - Page 2 - XtremeSystems Forums This thread Refback 13-07-2009 03:20
** Official ** Gigabyte UD3 P45 Series -- EP45-UD3 / EP45-UD3R / EP45-UD3P - Page 154 - XtremeSystems Forums This thread Refback 26-06-2009 07:44
Gigabyte EP45-Extreme must learn about bios - Overclockers Forums This thread Refback 08-06-2009 06:50
Gigabyte GA-EP45-DS3R OC ? - XtremeSystems Forums This thread Refback 17-05-2009 07:22
Dedicated Gigabyte EP45-DQ6 thread - Page 6 - XtremeSystems Forums This thread Refback 04-05-2009 23:37
Présentation de la GA-EP45-Extreme [Topic Unique] - Composants - Choix et problèmes - FORUM Jacky-PC - Syndrome-OC This thread Refback 24-04-2009 16:45
Gigabyte GA-EP45 Extreme - Forum de Luxx This thread Refback 16-04-2009 01:58
EP45-DSR3 MCH Voltage with Corsair Memory - TweakTown Forums This thread Refback 12-04-2009 16:10
Ga-ep45-extreme - Die Hardware-Community für PC-Spieler - PC GAMES HARDWARE EXTREME This thread Refback 25-03-2009 16:46
Gigabyte GA-EP45 Extreme - Forum de Luxx This thread Refback 27-02-2009 18:09
[TOPIC UNIQUE] Présentation de la GA-EP45-Extreme This thread Refback 26-02-2009 19:41
New build! - Overclock.net - Overclocking.net This thread Refback 21-02-2009 03:37
Experiencias y dudas del gigabyte DQ6 - MaximoTEC This thread Refback 15-02-2009 02:40
Reviews. on Clunk | BoardReader This thread Refback 11-02-2009 01:27



All times are GMT +1. The time now is 05:33.
Mark Forums Read | View Forum Leaders
Contact Us - Welcome To Clunk.org.uk! - Hardware Reviews, News, Guides and Much More! - Archive - Top


vBulletin skins developed by: eXtremepixels
Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2010, Jelsoft Enterprises Ltd.
SEO by vBSEO 3.3.2
Copyright© Clunk.org.uk 2010
| Home | Register | FAQ | Calendar | Today's Posts | Search | New Posts |