DFI UT X48-T3RS LanParty - Living Review - Page 44

Clunk · #**431** 14-09-2008, 20:40

DFI won't officially support their own beta BIOSes if it goes wrong, so use them at your own risk.

Your warranty is fine for final releases though.

hostility · #**432** 14-09-2008, 21:32

Quote:

Originally Posted by Clunk

Welcome to the forums

If you don't have a lot of patience and time and effort to put in, then this board isn't for you - it absolutely needs time spent setting it up and finding what works best for your gear.

Thanks, I really needed to tell me that.

Also, I agree that this forum is pretty amazing.

Thank you

eva2000 · #**433** 15-09-2008, 08:41

well 8/29 is an official bios for this board so not beta

WeiserRiese · #**434** 15-09-2008, 10:22

a question about your board, you had to screw down your board on your tower, but what is about the hole under the Heatpipe? have you installed the seperator without the screw or did you leave off the seperator?

eva2000 · #**435** 15-09-2008, 16:59

Quote:

Originally Posted by WeiserRiese

a question about your board, you had to screw down your board on your tower, but what is about the hole under the Heatpipe? have you installed the seperator without the screw or did you leave off the seperator?

you are you addressing ?? me ?

I flashed to 8/29 bios before installing my E8600 Q820A599 so lucky not to have any issues with setting vcore - so much so managed 4980Mhz at 1.55v bios set with Corsair Nautilus 500 H20 cooling for 3dmark05 Corsair TW3X2G2133C9DF Dominator + DFI UT X48-T3RS !