Gigabyte X48T DQ6 Living Review

[UNSTABLE_HERO]

Originally Posted by yukapuka

well i found most stable i can get with my current understanding of all this is 3612.55mhz (425.01x8.5)
and ram is currently at 3.33d rate so i think maybe i should just leave it unless anyone has any concrete ideas that will work in theory i would greatly appreciate the assistance, but for now, maybe thats all i can get, maybe ive reached the sky with this comp... anyhow thanks guys

thank supershank and unstable hero

i throw in the towel at 3.6ghz and 1490 ram

hey also the same max fsb for me(425 fsb )was my sky but 3400 the speed because i have a q9450(8x425)at 1,28v!at 426fsb everything is unstable no matter of volts or relaxed timmings(arrrrgggg crazy mobo)!!!74 degrees is a llttle bit high u must see if u are stable with less cpu volts than 1,35000 at 3612!

[yukapuka]

well i got it down to 1.27500 volts and its running fine so far under stress test , but it has not been confirmed will be certain as of tomorow, still tho under stress test im around 70 degrees but it drops down abit but does not surpass 71 degrees

[supershanks]

I'd check that the cooler is mounted & pasted correctly. The Noctua is a decent cooler & running at 1.27500v in bios ? should run cooler than that, I think

[yukapuka]

well ive checked everything and it is all in order, maybe i just got bad luck with hardware, im studying software engineering so i suppose theres two sides to everything, one will always be against you

[supershanks]

maybe i just got bad luck with hardware

Maybe ,not sure is your fan running full on at load ? what about case fans, is the hot aoir from the CPU cooler exhasted from the case, a rear fan blowing it out for example.

[yukapuka]

im going to say thats what i assume is happening, if i place my hands over the fan areas i feel hot air being excreted for sure, well im sort of sure that everything is doing what its supposed to be doing, oh and by the way i got the vcore to 3.00000 cause anything below and stress test unstable

[yukapuka]

mayb i should get liquid cooling

[supershanks]

mayb i should get liquid cooling

Get a bit more of a feel for things first is best
Then when your overclock is going great & you just know it can go further if only you could keep it cooler - Then's the time

[yukapuka]

fair enough, although i still feel things are where they can be displaced to its maximum

[yukapuka]

is it maybe because of th ram? or is it just the cpu has hit the roof? or something unknown