i also tried the pink slots!i will try to unplug floppy drive and usb devices!

is your NB screwed down properly ?? putting on +0.20 MCH shouldn't trip the board up. If using the B strap too much mch can cause issues, but your using D so should be fine.

Reason I asked you to drop ram divider earlier was to see if you still got errors or issues increasing fsb or mch voltage.

Re slots I've heard people say the pink slots were best , but to be honest didn't find any difference

__________________
Gigabyte GA X38 DQ6 Blog Voltage Measuring Guide Build Guide Abit IX38 Quad GT - Living Review II Gigabyte GA X48 DQ6 Living Review Foxconn Mars Living Review Asus P5E3 Deluxe Wifi Living Review

hey SS, what is your understanding about the differences between the two revisions on this board...is it voltages or was it parts?

Hi Ace, only difference I could see was the dropping of the crazy cool. There may be parts , but i didn't have the boards side by sise & comparing the new board with the pictures of the old board did not show any difference I noticed. That's why I said earlier I doubt the change in revisions is UNSTABLE_HERO's issue.

__________________
Gigabyte GA X38 DQ6 Blog Voltage Measuring Guide Build Guide Abit IX38 Quad GT - Living Review II Gigabyte GA X48 DQ6 Living Review Foxconn Mars Living Review Asus P5E3 Deluxe Wifi Living Review

ok...i was wondering since seeing this post: Have I been conned? - XtremeSystems Forums

you might want to weigh in. of course, he is talking about the DDR2 version.

ok Ace haver posted a reply to rob

__________________
Gigabyte GA X38 DQ6 Blog Voltage Measuring Guide Build Guide Abit IX38 Quad GT - Living Review II Gigabyte GA X48 DQ6 Living Review Foxconn Mars Living Review Asus P5E3 Deluxe Wifi Living Review

good job!

No worries

__________________
Gigabyte GA X38 DQ6 Blog Voltage Measuring Guide Build Guide Abit IX38 Quad GT - Living Review II Gigabyte GA X48 DQ6 Living Review Foxconn Mars Living Review Asus P5E3 Deluxe Wifi Living Review

SO NO MORE LUCK!CRAZY 1.3 REVISION......

oh man!some mercy from this gigabyte hardware please.......my pc went crazy i had f6a bios for 2 weeks!i try to open the pc to my stable settings and all I get is an endless series of restarts!after that a warning of recovering bios appeared and it flashed back to f5 thanks to dual bios!i am with f5 now!but the first bios was f4 why f5 now?i flashed from f4 to f5 and next to f5a and finally to f6a!so the backup bios should keep f4..and now it recovers to f5!ok i think ufos are flying over my house and the m/b went crazy so if anyone wants to buy a gigabyte motherboard i suggest to think it twice!first the killer f5 bios after the crazy 1.3 revision....i think my m/b is gonna make a nuke explosion in a few days..so stay tuned.....