Gigabyte X48T DQ6 Living Review - Page 58

Ace-a-Rue · #**571** 24-07-2008, 19:46

i wouldn't touch it....most times these bios updates have only minor changes.

supershanks · #**572** 24-07-2008, 21:22

Quote:

Originally Posted by PaPa SuMrF

so i just bought me another x48t from newegg im using it right now, revision 1.03 and will sell or just build a second x48t system for my son or sell it.

sounds like son's going to be on best behaviour

Quote:

Originally Posted by Ace

i would not touch any bios that says it is F5 with a-z as a modifier...giga should jump right to "F6"

Was thinking similar the other day. especially after seeing this m13os86 post#557

Quote:

Originally Posted by drwtsn32

But then they'd have to admit they screwed up F5! Instead they silently released a "newer" F5 on their web site... anyone have the guts to try it?

see above

m13os86 · #**573** 25-07-2008, 12:34

ya, i tried the "7/21/08" f5, downloaded from Giga-Byte's American server. Did NOT work for me... After 2 failed flash attempts, I was beginning to wonder if i still knew how! But i have flashed to f5d and that's what im running now.

PaPa SuMrF · #**574** 26-07-2008, 15:17

i ran upon a listing for a ga-48t-dq6 F6 bios release, but it seems the link was removed and now points to the dreaded F5 MB KILLER

Station-Drivers: le site de drivers, bios, firmwares, ect...

supershanks · #**575** 26-07-2008, 16:29

Yes see what you mean just followed it

Didn't leave a link , like you I guess , for obvious reasons

bituser · #**576** 27-07-2008, 01:18

I can not make this board stable at stock speeds. :/

Here is my bios configuration:

Code:

GIGABYTE GA X48T DQ6 Clock Settings
MB Intelligent Tweaker (MIT)
Robust Graphics Booster...........: Auto
CPU Clock Ratio...................: 9.5
CPU Frequency.....................: 3,16GHz
CPU Host Clock Control............: Disable
CPU Host Frequency(Mhz)...........: 1,333Mhz
PCI Express Frequency (Mhz).......: Auto
C.I.A.2...........................: Disabled
Performance Enhance...............: Standard
System Memory Multiplier (SPD)....: 4.00D
Memory Frequency(Mhz).............: 1,333Mhz
DRAM Timing Selectable ...........: Manual
Standard Timing Control
CAS Latency Time (tCL)............: 8
DRAM RAS# to CAS#  (tRCD).........: 8
DRAM RAS# Precharge (tRP).........: 8
Precharge Delay (tRAS)............: 24
Advanced Timing Control
ACT to ACT Delay(tRRD)............: Auto
Rank Write to READ Delay (tWTR)...: Auto
Write To Precharge Delay (tWR)....: Auto
Refresh to ACT Delay (tRFC).......: Auto
Read To Precharge Delay (tRTP)....: Auto
Static tREAD Value (tRD)..........: Auto
Static tREAD Phase Adj............: Auto
Command Rate (CMD)................: 2T
Clock Driving and Skew Control
CPU/PCIEX Clock Driving Control...: 700mv
CPU Clock Skew Control............: Normal
(G)MCH Clock Skew Control.........: Normal
System Voltage Control ()=Base Voltage):  Manual
DDR3 OverVoltage Control...: +0.40v
PCI-E OverVoltage Control.: Normal
FSB OverVoltage Control....: Normal
(G)MCH OverVoltage Control: +0.300v
CPU GTLREF1 Voltage*.........: Normal
CPU GTLREF2 Voltage*.........: Normal
Loadline Calibration..............: Auto
CPU Voltage Control...............: 1.22500v
Normal CPU Vcore..................: 1.22500v
Advanced Bios Features
Limit CPUID Max to 3..............: Disabled
No-Execute Memory Protect.........: Disabled
CPU Enhanced Halt(CIE)............: Disabled
CPU Thermal Monitor 2.............: Enabled
CPU EIST Function.................: Disabled
Virtuaalization Technology........:  Disabled

Any suggestions? thanks!

loonym · #**577** 27-07-2008, 01:50

This all makes me curious what bios will be on my board when it is returned from rma.

perso · #**578** 27-07-2008, 05:06

Hello !
Bios F5 flash success.....
I take it here :
Translated version of http://tweakers.net/nieuws/54647/gigabyte-zet-per-abuis-corrupte-bios-update-online.html

supershanks · #**579** 27-07-2008, 07:36

Hi bituser,
Welcome to the forum

Might be a typo or me being stupid but, I'm confused by :-

Quote:

CPU Host Clock Control............: Disable
CPU Host Frequency(Mhz)...........: 1,333Mhz

CPU Host Clock Control............: Disable means your leaving the fsb on auto which is 333.33 not quad pumped 1.333Mhz which you show for CPU Host Frequency(Mhz) ??

This is your ram ??
OCZ DDR3 PC3-12800 Platinum Edition OCZ3P16004GK
I'd try Memory multiplier of 4.00B to see if it's any better.
Why are you at ??

Quote:

CAS Latency Time (tCL)............: 8
DRAM RAS# to CAS# (tRCD).........: 8
DRAM RAS# Precharge (tRP).........: 8
Precharge Delay (tRAS)............: 24

Aren't those rated at 7-7-7-24 ?? have you tried with 7s ??

I'd get Memtest86+ v2.00 And test your memory, preferably overnight. Do you use active cooling ??. If you get errors try OCZ memory Support

Let us know how it goes

Have you tried testing with memtest