Gigabyte X48T DQ6 Living Review

[supershanks]

Too bad gigabyte hadn't done the same

[PaPa SuMrF]

Originally Posted by loonym

Too bad gigabyte hadn't done the same

so sad and you know someone is going to flash it not knowing or have not read of the dead MB"S caused from the bad flash.

[Ace-a-Rue]

Supershanks:

did you try the F5 bios?

[supershanks]

did you try the F5 bios?

no m8, been playing with the DFI atm (seeing if I can get a performance 1/4 as good as the x48T is aa struggle) & the Extreme

[mjanota]

Hey dudes, im back and with a similar problem..

Somehow the motherboard reset my oc settings, having worked for a few days.. and it keeps doing so as it is now. Tried the same proceedure to: remove battery (10 min), flash to F6, remove battery (10 min), flash to F7G, remove battery (10 min), and try to OC. Worked like a charm last time but now it dosent seem to work at all..

I managed to find some people having problems with their powersupplies beeing to weak. the setup is in my signature, think 650W is to weak?

[supershanks]

Somehow the motherboard reset my oc settings, having worked for a few days..

Probably just means that overclock failed. For example do you have active cooling on your ram ?? If not ram may have got too hot.

From previous post

Came back, battery had been out for more then an hour after ha having flashed to F7G, and everything works perfect as it seems now

Had you Tested stability at all ??

After flashing does it post ok ??
Does it only not post after you overclock ??

[mjanota]

Originally Posted by supershanks

Probably just means that overclock failed. For example do you have active cooling on your ram ?? If not ram may have got too hot.

From previous post
Had you Tested stability at all ??

After flashing does it post ok ??
Does it only not post after you overclock ??

Yeah I got active cooling on the ram, the funny part was, I didnt even notice the reset until I saw it in CPU-Z..

I did both memtest HCI. OCCT, Prime, worked fine for 7 full hours and random 1hour tests here and there..

The computer always posts no matter what I do, but the inbuilt safe function disables my changes to FSB, PCI-E mhz, basicly same problem I had earlier has shown up..

EDIT: Currently it keeps reseting at the memory testing stage..

[supershanks]

Sorry I misunderstood, original symptoms back , right. Think I'd just go back to the one that worked ok in 1st place F6 until next bios is released.

Leaving the battery out can give inconsistent results, it's really a question of which is easiest

luck

[m13os86]

another one here with a dead X48T-DQ6 after attempting to flash to f5...

[supershanks]

Hi m13os86,
Welcome to the forum , piity your joining with a dead mobo. You been in contact with Gigabyte ??