Gigabyte X48T DQ6 Living Review

[kangaxxpk]

soon new screens
i did validate @ 610
and i did a 4mb pi @ 600
i am near stability at 600, at that high fsb any single paramether is important. i saw that a too much vtt give instability.
monday i retry bench starting with last setting and i think i can 3dmark at 600 fsb... or i hope :P

[kangaxxpk]

[supershanks]

Nice going mate , you've left mine for dead

[Kivan]

Hi all !!!

Just got my new setup, here´s the specs for your info.

- Antec P182
- LC Power 850W PSU
- Intel Q9450
- Thermalright 120 Extreme + 140mm Noctua 18Db Fan
- GigaByte GA-X48T-DQ6
- OCZ PC3-16000 PLATINUM EB 2000MHZ 9-8-8-28 2GB (1.8V)
- ATI X300 (waiting for 4870x2)
- Audigy 2 ZS
- 1 x Seagate 120 Gig Sata II
- 1 x Maxtor 350 Gig Sata II
- Samsung T220, 22 LCD
- UPS 1000VA

Bios –F4

Now the questions

I want a good setup for 24/7 Overclock on Air

- What is the best Bios?
- I can get 500FSB without any voltage modification, should i make any voltage modification.?
- If so what are the maximum voltage for a 24/7 usage?
-Can any one put reference settings that i shoul use in the bios?

Tks for the help.

[supershanks]

Hi Kivan,
welcome to the forum
Nice setup
Can't help you really with as I've run with Wolfdales with this board.
Best bios are F5A & F5D see link in post#1 under BTA Bios.

You'd be better off looking at Ace-A-Rue's settings as he's used a quad QX9650 Ace's Bios shots

for memory timings most of mine are around 1800 have a look here E8400 4,336 8x542@3.33D 1,807 8,7,6,14

Also check the GtlRef running -3 on both channels gives most stability

Hope that helps
luck

[Ace-a-Rue]

Originally Posted by supershanks

Hi Ace
Reckon that's not far off.
Believe soft delete is like the Recycle bin, it disappears from forum view but is still on server. hard delete , it's gone

AH!...thanks SS for the explanation...that explains everything

good to be back...trying to get my wife to recover from her cold...she is at the end but still hacking.

[supershanks]

Hi Ace

trying to get my wife to recover from her cold...she is at the end but still hacking.

Hopefully now she's home she'll mend quicker
How was trip ok ??

[Ace-a-Rue]

trip was tiresome since it is 9 hours in duration with stops along the way for us and the doggy to go potty!

hey, have you tried measuring the Vdimm directly off the board to see how accurate the bios reading is?

[supershanks]

trip was tiresome since it is 9 hours in duration with stops along the way for us and the doggy to go potty!

was that the round trip or per leg ?? Either way i's tiring

hey, have you tried measuring the Vdimm directly off the board to see how accurate the bios reading is?

Will be doing , just dropped a reply on your thread , in my best pirate impression voice , after solving the

can you tell me where that is on the board?

X marks the spot

[Ace-a-Rue]

they finally took the staples out of my son's incision...it was close to 50 staples...the incision was like 20-24 inches in length...it went from slightly below the chest bone all the way down to his pelvic bone.