Gigabyte X48T DQ6 Living Review

[supershanks]

this is the max fsb validate i did at liquid cooling.
with phase i can reach 615 but validate is corrupted, next time i try

this are setting:

PCI Express Frequency (Mhz).......:101
C.I.A.2...........................: Disabled
Performance Enhance...............: standard
System Memory Multiplier (SPD)....: 3.33D
CPU/PCIEX Clock Driving Control...: 800mv
CPU Clock Skew Control............: 150ps
(G)MCH Clock Skew Control.........: normale
System Voltage Control ()=Base Voltage): Manual
DDR3 OverVoltage Control...(1.50v): +0,35v
PCI-E OverVoltage Control.,(1.50v): +0,15v
FSB OverVoltage Control....(1.10v): +0,15v
(G)MCH OverVoltage Control,(1.45v): +0,40v

more than 150 ps there is no difference, its dangerous for cpu leave that valor at 150ps ??

Wow Nice you beat me I got my E8500 into XP with

I think this was my best E8400


Must admit i've not tried it with

CPU Clock Skew Control............: 150ps

Tthough , that might be the lost key haven't goner above 100 tbh. I've been giving (G)MCH OverVoltage Control around 0.475v as well.


Thanks for sharing

[kangaxxpk]

try with x6 or x7 with my settings and tell me

[supershanks]

more than 150 ps there is no difference, its dangerous for cpu leave that valor at 150ps ??

I don't think so , though they are related to the PLL circuit. Anandtech gave about the most detailed description I've seen CPU Clock Skew Control and (G)MCH Clock Skew Control But where pretty dismissive of it. I have found that 50~100 has given a bit more stability on higher clocks, but found that tweaking GLRef to -3 on both channels also helped. As I said haven't pushed on beyond 100. Will give it a go later tonight & see what i get.

[supershanks]

try with x6 or x7 with my settings and tell me

tried it & didn't get into xp. Don't think it was too far away , but post froze after another couple of goes. Will bear it in mind though.

[kangaxxpk]

Originally Posted by supershanks

tried it & didn't get into xp. Don't think it was too far away , but post froze after another couple of goes. Will bear it in mind though.

translate in a easier english

btw any motherbeard have different setting for same result ^_^

tomorrow i try with 1/2 hp phase on cpu and i validate at 620 :P (i hope)

[supershanks]

Sorry forgot
Posted , but couldn't get into xp. After several attempts, it froze on post .

tomorrow i try with 1/2 hp phase on cpu and i validate at 620 :P (i hope)

Look forward to it

[kangaxxpk]

first validate was with f4 bios.

this is with f5a :P little better.



same configuration and settings

[supershanks]

Nice going what batch & pack date is that ?? , it's pretty sweet

[kangaxxpk]

CPU-Z Validator 2.1

hihi

[supershanks]

just singing your praises over here overclocking E8500 to 4655MHZ with Air cooling need help what next ? post#3