Gigabyte X48T DQ6 Living Review

[supershanks]

just found an E8500 to order...i'm waiting for my wife to leave the room...LOL

Haha , mines sanctioned, wife knows about it

[Ace-a-Rue]

WELL...the deed has been done...hehehehehehe...now, for "La" look when the "big" box arrives with all the stuff i ordered

[supershanks]

WELL...the deed has been done...hehehehehehe...now, for "La" look when the "big" box arrives with all the stuff i ordered

ooooh I must have won that competition
I remember one guy had a new gfx card delivered to his m8, then told his wife that he'd borrowed it. :Lol:

[Ace-a-Rue]

that is hilarious!

[supershanks]

that is hilarious!

Yep skippy9146 & his backpack had me cracked up

[Ace-a-Rue]

Originally Posted by supershanks

E8400 4,320 8x540@3.33D 1800Mhz 8,7,6,14



Click to Enlarge

GIGABYTE GA X48T DQ6 Clock Settings
MB Intelligent Tweaker (MIT)
Robust Graphics Booster...........: Turbo
CPU Clock Ratio...................: 8.0
CPU Frequency.....................: 4,320Mhz
CPU Host Clock Control............: Enabled
CPU Host Frequency(Mhz)...........: 540
PCI Express Frequency (Mhz).......: 104
C.I.A.2...........................: Disabled
Performance Enhance...............: Turbo
System Memory Multiplier (SPD)....: 3.33D
Memory Frequency(Mhz).............: 1,800Mhz
DRAM Timing Selectable ...........: Manual
Standard Timing Control
CAS Latency Time (tCL)............: 8
DRAM RAS# to CAS#  (tRCD).........: 7
DRAM RAS# Precharge (tRP).........: 6
Precharge Delay (tRAS)............: 14
Advanced Timing Control
ACT to ACT Delay(tRRD)............: 4
Rank Write to READ Delay (tWTR)...: 4
Write To Precharge Delay (tWR)....: 10
Refresh to ACT Delay (tRFC).......: 50
Read To Precharge Delay (tRTP)....: 4
Static tREAD Value (tRD)..........: 9
Static tREAD Phase Adj............: Auto
Command Rate (CMD)................: Auto
Clock Driving and Skew Control
CPU/PCIEX Clock Driving Control...: 700mv
CPU Clock Skew Control............: 50
(G)MCH Clock Skew Control.........: 50
System Voltage Control () = Base Voltages
DDR3 OverVoltage Control...(1.50v): +0.35v
PCI-E OverVoltage Control.,(1.50v): +0.10v
FSB OverVoltage Control....(1.10v): +0.15v
(G)MCH OverVoltage Control,(1.45v): +0.475v
CPU GTLREF1 Voltage*.......(67%)..: Normal
CPU GTLREF2 Voltage*.......(61%)..: Auto
Loadline Calibration..............: Auto
CPU Voltage Control...............: 1.3875v
Normal CPU Vcore..................: 1.1125v
Note: * Hidden Features Press [CTRL] + [F1] from main Menu to Access
Advanced Bios Features
Limit CPUID Max to 3..............: Disabled
No-Execute Memory Protect.........: Disabled
CPU Enhanced Halt(CIE)............: Disabled
CPU Thermal Monitor 2.............: Enabled
CPU EIST Function.................: Disabled
Virtuaalization Technology........:  Disabled

was just looking at this and i see that you are soaring to new heights with the 8400!...is that on air or water?...even relatively low vcore TOO!

[supershanks]

yes on water. As you'll find depending on your chip, perhaps , but on both the E8200 & E8400 I can get a high FSB 540~550 with relatively low vcore, it's when maximg cpu Multi, that the vcore needs cranking up. I can see the difference between a 24/7 clock & an ocing run is half a multi

[Ace-a-Rue]

i am looking forward to running my 8500; it arrives today.

[supershanks]

well mine arrived today , bur Linda passed her ECDL ( European computer driving license)
so we went out for a meal instead

[Ace-a-Rue]

mine got here too but i pooped out...LOL

congrats to your wife for passing the driver's test for "ALL" of Europe...correct?