DFI LT X48-T2R Lanparty Living Review. - Page 80

affiliate13 · #**791** 16-09-2008, 17:23

Quote:

Originally Posted by geo69

Ok Thanks i have been play around with the GTL no real results yet and increasing the vtt did nothing iether I can boot into vista at 4.27 ghz no problem run explorer but as soon as i run a bench it stops in a matter if seconds. No lockup though. I just need to find the stability somwhere. Oh and this is not a 24/7 system just my toy so far i am very happy with the board but after you have owned a striker any board is great.

Ahh, i could boot into windows with the E3110 i had at 4.4Ghz but it was less than useless, even with 1.475v.
Have you thought of trying to get a rock solid 4Ghz yet? Then try going up, best to find a lower mark to start and work up. just a thought.

Clunk · #**792** 16-09-2008, 17:36

What VTT did you go up to?

geo69 · #**793** 16-09-2008, 19:48

Quote:

Originally Posted by Clunk

What VTT did you go up to?

Quote:

Originally Posted by affiliate13

Ahh, i could boot into windows with the E3110 i had at 4.4Ghz but it was less than useless, even with 1.475v.
Have you thought of trying to get a rock solid 4Ghz yet? Then try going up, best to find a lower mark to start and work up. just a thought.

VTT went up 1.35
I can run stable at 4GHz no problem very easy to do jsut have to increase the CPU voltage up to 1.325 or 1.350 everything else at stock. Ican run prime 95 for hours, super PI and Mark 06 score 177xx cant remember the last two numbers. I was hoping to push 4.6 to 4.8 GHz. How much do you think my cheap ram has to do with it. If i push the CPU voltage to high (anything over 1.43) the system comes on for a few seconds and shuts off (won't complete a post) LCD poster sits at C1

affiliate13 · #**794** 16-09-2008, 19:55

Quote:

Originally Posted by geo69

VTT went up 1.35
I can run stable at 4GHz no problem very easy to do jsut have to increase the CPU voltage up to 1.325 or 1.350 everything else at stock. Ican run prime 95 for hours, super PI and Mark 06 score 177xx cant remember the last two numbers. I was hoping to push 4.6 to 4.8 GHz. How much do you think my cheap ram has to do with it. If i push the CPU voltage to high (anything over 1.43) the system comes on for a few seconds and shuts off (won't complete a post) LCD poster sits at C1

What are you running it at? it is rated for 800mhz, but you prolly have some headroom, yours is the C5 version so i wouldnt suggest loosening the timings. Did you say you tried the 333/667 strap?

geo69 · #**795** 16-09-2008, 20:19

Quote:

Originally Posted by affiliate13

What are you running it at? it is rated for 800mhz, but you prolly have some headroom, yours is the C5 version so i wouldnt suggest loosening the timings. Did you say you tried the 333/667 strap?

Ya i tried changing the strap i did not think it had any affect I will tri it agian when i get home from work.

Thanks for your help

affiliate13 · #**796** 16-09-2008, 21:24

Quote:

Originally Posted by geo69

Ya i tried changing the strap i did not think it had any affect I will tri it agian when i get home from work.

Thanks for your help

Lol, np - though im not sure i am helping.

hyper48 · #**797** 17-09-2008, 17:54

Hello everyone!

Congratulations for the perfect review of the board. I am just about to buy one of them. I am looking to buy it from here but I realize that there are not heat minators on the NB, SB and on PWM's as there are in this review.

Is that a problem or they just missing from the picture? Are there any changes to this board at all at the moment?

Thank you!

affiliate13 · #**798** 17-09-2008, 18:12

Quote:

Originally Posted by hyper48

Hello everyone!

Congratulations for the perfect review of the board. I am just about to buy one of them. I am looking to buy it from here but I realize that there are not heat minators on the NB, SB and on PWM's as there are in this review.

Is that a problem or they just missing from the picture? Are there any changes to this board at all at the moment?

Thank you!

Its OK, the UT and LT versions are the same board the cooling is different so it seems in most pictures they just show the bare board. You will get all the heat sinks in Clunks picture.

Have you dealt with that supplier before?
I am not suggesting that you should not buy from them but perhaps you should read the seller ratings at the bottom on the main forum page.

Good luck with the board, let us know how it works out for you.

hyper48 · #**799** 17-09-2008, 18:35

Quote:

Originally Posted by affiliate13

Its OK, the UT and LT versions are the same board the cooling is different so it seems in most pictures they just show the bare board. You will get all the heat sinks in Clunks picture.

Have you dealt with that supplier before?
I am not suggesting that you should not buy from them but perhaps you should read the seller ratings at the bottom on the main forum page.

Good luck with the board, let us know how it works out for you.

Thank you for your reply!

Quote:

Have you dealt with that supplier before?
I am not suggesting that you should not buy from them but perhaps you should read the seller ratings at the bottom on the main forum page.

Yes, I have bought a couple of things before and I can say that I am happy. Never had a problem with them before, I hope not to have any this time as well.

Something more! At the moment I have this cooling system for my Q6600 processor. Is it going to be a pain with the NB heat minator?

affiliate13 · #**800** 17-09-2008, 18:56

Quote:

Originally Posted by hyper48

Thank you for your reply!

Yes, I have bought a couple of things before and I can say that I am happy. Never had a problem with them before, I hope not to have any this time as well.

Something more! At the moment I have this cooling system for my Q6600 processor. Is it going to be a pain with the NB heat minator?

Cant say for sure, though it looks big.