DFI LT X48-T2R Lanparty Living Review.

[Kelainefes]

What he said, and the 8800 GTX in the loop doesn't help.
If you absolutely have to run at those voltages 24/7, i'd seriously look at adding another rad, but the most sensible option is to back off a little and stay where 1.4 1.45 will take you.

[me3850]

hello i have one problem my mobo not boot i see c1 and after 10 on lcd status and the system not boot i have try clear cmos but np what's this 10 status on lcd?

[affiliate13]

Originally Posted by me3850

hello i have one problem my mobo not boot i see c1 and after 10 on lcd status and the system not boot i have try clear cmos but np what's this 10 status on lcd?

Hello me3850,
Welcome to the forums, please update your profile to display your system specs using this guide http://www.clunk.org.uk/forums/forum...r-profile.html

Then grab the Bios template from here and us it to list your settings so we can see what is wrong:
http://www.clunk.org.uk/forums/12131-post16.html

[me3850]

i have update bios X48t2r and now my mobo on led diagnostic see 10 and no boot what's 10 status?
i have try clear cmos but np not work same error

C1 --> 10 no boot

thx for help

[affiliate13]

Originally Posted by me3850

i have update bios X48t2r and now my mobo on led diagnostic see 10 and no boot what's 10 status?
i have try clear cmos but np not work same error

C1 --> 10 no boot

thx for help

C1 Error is usually memory related.

Here is a list of post code errors:
DFI BIOS Guide For Intel Chipset Based Motherboards.

[me3850]

but the C1 passes, stop at 10 status :S

10 Auto detec EEPROM Check Flash type and copy flash
write/erase routines to 0F000h segments

bios corrupt?

[Kelainefes]

Unplug the psu from the mb, take the battery out and leave it like that for 30 minutes/1 hour.
Then put the battery in place, reconnect the cables and power on.
Failing that, try to boot with only one stick of memory; is one fails try the other(s) one by one and in different slots too.

[Clunk]

I've never seen it land on 10 before

Kelainefes suggestions sound right, but you need to add your system specs to your profile, click the big green link in my sig

[mmpl]

Originally Posted by affiliate13

C1 Error is usually memory related.

Here is a list of post code errors:
DFI BIOS Guide For Intel Chipset Based Motherboards.

I have the same symptons after update bios i put off batery power off mobo w8 15 min and turn on it and everything its ok untill i load settings that i do in bios before update bios you must create new setting and save it in bios dont use the old one!!!

[Kelainefes]

Yep, not always old settings work after a BIOS update.