DFI LT X48-T2R Lanparty Living Review.

[Kelainefes]

Originally Posted by zsamz_

ive lapped my pwm heatsink n i never seen mine go higher that 35c

What is your CPU/OC/case/fan setup/room temp?

[AriciU]

Here are my 24/7 settings for my OC.

CPU Feature Page
Thermal Management Control................Disabled
PPM (EIST) Mode...........................Disabled
Limit CPUID MaxVal........................Disabled
CIE Function..............................Disabled
Execute Disable Bit.......................Disabled
Virtualization Technology.................Disabled
Core Multi-Processing.....................Enabled

Main BIOS Page
Exist Setup Shutdown......................Mode 2
Shutdown After AC Loss....................Disabled
O. C. Fail Retry Counter..................0
CLOCK VC0 Divider.........................Auto
CPU Clock Ratio...........................9.5x
CPU N/2 Ratio.............................Enabled
CPU Clock.................................453 MHz
Boot Up Clock.............................Auto
DRAM Speed................................333/667
PCIE Clock................................100MHz
PCIE Slot Config..........................1X 1X

CPU Spread Spectrum.......................Disabled
PCIE Spread Spectrum......................Disabled
SATA Spread Spectrum......................Disabled

Voltage Setting Page 
CPU VID Control...........................Auto  1.1825V
CPU VID Special Add.......................109.21%
DRAM Voltage Control......................2.190V
SB Core/CPU PLL Voltage...................1.510V
NB Core Voltage...........................1.304V
CPU VTT Voltage...........................1.210V
VCore Droop Control.......................Disabled
Clockgen Voltage Control..................3.45V
GTL+ Buffers Strength.....................Strong
Host Slew Rate............................Weak
GTL REF Voltage Control...................Enabled
CPU GTL 1/52 REF Volt.....................72
CPU GTL 0/3 REF Volt......................70
North Bridge GTL REF Volt ................53

DRAM Timing Page
Enhance Data Transmitting.................Fast
Enhance Addressing........................Fast
T2 Dispatch...............................Disabled
Clock Setting Fine Delay..................Listed Below
CAS Latency Time (tCL)....................4
RAS# to CAS# Delay (tRCD).................4
RAS# Precharge (tRP)......................4
Precharge Delay (tRAS)....................4
All Precharge to Act......................Auto
REF to ACT Delay (tRFC)...................Auto
Performance Level.........................Auto
Read Delay Phase Adjust...................Listed Below
MCH ODT Latency...........................Auto
Write to PRE Delay (tWR)..................Auto
Rank Write to Read (tWTR).................Auto
ACT to ACT Delay (tRRD)...................Auto
Read to Write Delay (tRDWR)...............Auto
Ranks Write to Write (tWRWR)..............Auto
Ranks Read to Read (tRDRD)................Auto
Ranks Write to Read (tWRRD)...............Auto
Read CAS# Precharge (tRTP)................Auto
ALL PRE to Refresh........................Auto

Read Delay Phase Adjust Page
Channel 1 Phase 0 Pull-In.................Auto
Channel 1 Phase 1 Pull-In.................Auto
Channel 1 Phase 2 Pull-In.................Auto
Channel 1 Phase 3 Pull-In.................Auto
Channel 1 Phase 4 Pull-In.................Auto

Channel 2 Phase 0 Pull-In.................Auto
Channel 2 Phase 1 Pull-In.................Auto
Channel 2 Phase 2 Pull-In.................Auto
Channel 2 Phase 3 Pull-In.................Auto
Channel 2 Phase 4 Pull-In.................Auto

Clock Setting Fine Delay Page
Ch1 Clock Crossing Setting................More Aggresive
DIMM 1 Clock fine delay...................Current 1924ps
DIMM 2 Clock fine delay...................Current 1074ps
DIMM 1 Control fine delay.................Current 1012ps
DIMM 2 Control fine delay.................Current 1012ps
Ch 1 Command fine delay...................Current 1474ps

Ch2 Clock Crossing Setting................More Aggresive
DIMM 3 Clock fine delay...................Current 1800ps
DIMM 4 Clock fine delay...................Current 837ps
DIMM 3 Control fine delay.................Current 786ps
DIMM 4 Control fine delay.................Current 124ps
Ch 2 Command fine delay...................Current 24ps

Ch1Ch2 CommonClock Setting................More Aggresive

Ch1 RDCAS GNT-Chip Delay..................Auto
Ch1 WRCAS GNT-Chip Delay..................Auto
Ch1 Command to CS Delay...................Auto

Ch2 RDCAS GNT-Chip Delay..................Auto
Ch2 WRCAS GNT-Chip Delay..................Auto
Ch2 Command to CS Delay...................Auto

[!TIMMY!]

I think I will go down the HR09 route for the mosfets and a Enzotech SB heatsink if I can find it in stock in the UK. Going to re-adjust my NB water block, and file down the 2 Enzotech ram sinks that don't fit on my Asus 8800GT Glacier, and make them fit.

[Kelainefes]

I also got the enzotech low profile cooler on the SB, its quality is excellent, expecially the base finish, and the pushpins are very strong, almost an overkill for a southbridge.
Biggest drawback is that the color does not match too well on the black/UVgreen Lanparty theme.

[!TIMMY!]

Originally Posted by Kelainefes

I also got the enzotech low profile cooler on the SB, its quality is excellent, expecially the base finish, and the pushpins are very strong, almost an overkill for a southbridge.
Biggest drawback is that the color does not match too well on the black/UVgreen Lanparty theme.

hehe, I don't have a window on my case so I am ok. I can't find it in stock anywhere in the UK Where did you get urs from?

[Kelainefes]

Well, i got it from an italian e-shop, so i don't think i can help you...
If you can't get an enzotech from UK, get a HR05 SLI, doesn't cost much more, and you won't have to import.

[supershanks]

Chilled PC have a number of enzotech products, try contacting them if what your after ain't there

[Kelainefes]

Yeah they got the low profile at Chilled PC, but it's at 10 GBP, while the HR05 SLI is at 7,50, I'd take it without a second thought.

[!TIMMY!]

I think ill take ur advice and order the HR09, thanks.

[supershanks]

Yeah they got the low profile at Chilled PC, but it's at 10 GBP, while the HR05 SLI is at 7,50, I'd take it without a second thought.

didn't do a £ check They do do good stuff though