DFI LANPARTY JR 790GX-M3H5 Living Review

**supershanks** · 06-06-2009 00:26

Originally Posted by Pastie

What do you reckon it's going to top out at Shanks ?

Well glimse of what I hope is more to come, ran it briefly last night.

**Pastie** · 06-06-2009 09:29

Race on then............

**supershanks** · 06-06-2009 09:34

**supershanks** · 09-06-2009 22:26

TRFC0~TRFC3 settings
Bios options are

with 110 the [auto] default.

110:

90

Which compares as below, so if you can manage it get it

**supershanks** · 09-06-2009 22:27

3.8Ghz 17.5x217 @1,333Mhz 1,487Mhz 6-6-6-18
Thought I'd have a play with 1,333mhz ram ratio using 6-6-6-18 with my Cellshock DDR3 2x1Gb 1600 7-7-7-14 1.7v~1.9v
Click Pic & scroll for more

I started with Ungrouped:-
Bench

Stability

Bios Settings

Code:

DFI LANPARTY JR 790GX-M3H5 
Note:There are 2 Bios modes Easy and Advanced Easy is default use [F9} for advanced items

(shown as *)
Genie Bios Settings
DRAM Configuration Sub Menu  [Press Enter ]
MCT Memory Timing  Sub Menu  [Press Enter ]
MCT Memory Timing...................: [Manual] 
2T Mode.............................:[Enabled] 
CAS Latency Time....................:6
Precharge delay (tRAS)..............: 18
DRAM RAS# Precharge.................:6
DRAM RAS#  to CAS# Delay............:6
Bank to Bank Cmd (TRRD).............: 4
TRC.................................:22
TRTP*...............................: 4
Write Recovery (TWR)*...............:8
Write-Read C'mand(TWTR)*............:4
TRFCO...............................: [110.0ns]
TRFC1 ..............................: [110.0ns]
TRFC2 ..............................: [110.0ns]
TRFC3...............................: [110.0ns]
Trdrd*..............................: [Auto]
TrwtTO*.............................:[Auto] 
Twrrd*..............................: [Auto]
Twrwr*..............................:[Auto]
ODC Control. Sub Menu  [Press Enter]
Output Driver Comp..................:[Auto]
Channel A
CPU On-die Termination..............:[240 ohms +/-20%]
DOS Drive Strength .................:[1.00x]
Data Drive Strength  ...............:[1.00x]
MEMCLK Drive Strength ..............:[1.00x]
Addr/Cmd Drive Streng...............:[1.50x]
CS/ODT Drive Strength...............:[1.50x]
CKE Drive Strength..................:[1.50x]
Channel B
DOS Drive Strength .................:[1.00x]
Data Drive Strength  ...............:[1.00x]
MEMCLK Drive Strength ..............:[1.00x]
Addr/Cmd Drive Streng...............:[1.50x]
CS/ODT Drive Strength...............:[1.50x]
CKE Drive Strength..................:[1.50x]
----------------------Dram Configuration--------------------------
DCTs Mode................................:[Unganged]
CKE base power down mode.........: [Enabled]
CKE based power down................: [Per Channel]
Memory Hole Remapping...............:[Enabled]
Auto Optimise Bottom IO..............:[Enabled]
Bottom of [31:24] IO Space.........:[D0]
Bottom of UMA  Dram [31:24].......:[FC]
------------------Main Genie Menu------------------------
HT Link Control  Sub Menu  [Press Enter ] 
HT Link Width *.....................:[Auto]
HI Link Tristate*...................:[Auto]
UnitiD Clumping.....................:[Auto] 
------------------Main Genie Menu------------------------
CPU Feature........... Sub Menu  [Press Enter ]
AMD ClE Support.....................:[Disabled]
Advanced Clock Calibration..........: [Disabled]
Value  (All Cores)) - ...............: -2%
x Value (Core 8)....................: -2% 
x Value (Core 2)....................: -2% 
x Value (Core 1)....................: -2% 
x Value (Core 3)....................:  -2% 
Secure Virtual Machine Mod..........: [Disabled]
AND Family lOH Down core............:[Quad]
AND CPU stepping....................: P0
------------------Main Genie Menu------------------------
Memory Current Value Mhz............: 1,446 Mhz.
Timing Mode.........................:[Manual]
Memory Clock value or Limit.........:[DDR3 1333]
AMD KB Cool&Quiet control...........:  [Disabled]
CPU NB Vlotage......................:[Auto]
CPU Clock Ratio.....................: x17.5
CPU NB Clock Ratio..................: [Auto]
HT Link Frequency...................: [Auto]
CPU VId Special Add mv............:+75mv
DRAM Voltage Control..............: 1.837v
NB HT Voltage.......................:1.30v
NB Core Voltage.....................:1.40v
NB PCIE Voltage.....................:1.10v
SB PLL 1.2V Voltage.................:1.26v
Side Port Voltage...................:1.60v
O.C. Fail retry Counter.............:1
O.C. Fail CMOS Reload...............: [Disabled]
Spread Spectrum.....................: [Disabled]
CPU Host/HTT Boot Up Clock..........: 200
CPU HostHTT Clock...................: 217
CPU Host.HTT  Adjust Gap............: 5
PCIE Clock..........................: 103

**supershanks** · 09-06-2009 22:30

3.8ghz 17x224 @1,333Mhz 1,493Mhz 6-6-6-18

I originally ran this with NB multi & HT Link at 2,240Mhz. Whilst it benched ok, could only get stability by dropping them back to 2,016mhz. Also tried with HT Link at 1800 - 2016mhz real speed NB at 2240mhz but that wasn't stable either.

Bench
2,240 HT Link Frequency

2,016mhz HT Link Frequency

Stability

Bios Settings

Code:

DFI LANPARTY JR 790GX-M3H5 
Note:There are 2 Bios modes Easy and Advanced Easy is default use [F9} for advanced items

(shown as *)
Genie Bios Settings
DRAM Configuration Sub Menu  [Press Enter ]
MCT Memory Timing  Sub Menu  [Press Enter ]
MCT Memory Timing...................: [Manual] 
2T Mode.............................:[Enabled] 
CAS Latency Time....................:6
Precharge delay (tRAS)..............: 18
DRAM RAS# Precharge.................:6
DRAM RAS#  to CAS# Delay............:6
Bank to Bank Cmd (TRRD).............: 4
TRC.................................:22
TRTP*...............................: 4
Write Recovery (TWR)*...............:8
Write-Read C'mand(TWTR)*............:4
TRFCO...............................: [110.0ns]
TRFC1 ..............................: [110.0ns]
TRFC2 ..............................: [110.0ns]
TRFC3...............................: [110.0ns]
Trdrd*..............................: [Auto]
TrwtTO*.............................:[Auto] 
Twrrd*..............................: [Auto]
Twrwr*..............................:[Auto]
ODC Control. Sub Menu  [Press Enter]
Output Driver Comp..................:[Auto]
Channel A
CPU On-die Termination..............:[240 ohms +/-20%]
DOS Drive Strength .................:[1.00x]
Data Drive Strength  ...............:[1.00x]
MEMCLK Drive Strength ..............:[1.00x]
Addr/Cmd Drive Streng...............:[1.50x]
CS/ODT Drive Strength...............:[1.50x]
CKE Drive Strength..................:[1.50x]
Channel B
DOS Drive Strength .................:[1.00x]
Data Drive Strength  ...............:[1.00x]
MEMCLK Drive Strength ..............:[1.00x]
Addr/Cmd Drive Streng...............:[1.50x]
CS/ODT Drive Strength...............:[1.50x]
CKE Drive Strength..................:[1.50x]
----------------------Dram Configuration--------------------------
DCTs Mode................................:[Unganged]
CKE base power down mode.........: [Enabled]
CKE based power down................: [Per Channel]
Memory Hole Remapping...............:[Enabled]
Auto Optimise Bottom IO..............:[Enabled]
Bottom of [31:24] IO Space.........:[D0]
Bottom of UMA  Dram [31:24].......:[FC]
------------------Main Genie Menu------------------------
HT Link Control  Sub Menu  [Press Enter ] 
HT Link Width *.....................:[Auto]
HI Link Tristate*...................:[Auto]
UnitiD Clumping.....................:[Auto] 
------------------Main Genie Menu------------------------
CPU Feature........... Sub Menu  [Press Enter ]
AMD ClE Support.....................:[Disabled]
Advanced Clock Calibration..........: [Disabled]
Value  (All Cores)) - ...............: -2%
x Value (Core 8)....................: -2% 
x Value (Core 2)....................: -2% 
x Value (Core 1)....................: -2% 
x Value (Core 3)....................:  -2% 
Secure Virtual Machine Mod..........: [Disabled]
AND Family lOH Down core............:[Quad]
AND CPU stepping....................: P0
------------------Main Genie Menu------------------------
Memory Current Value Mhz............: 1,492 Mhz.
Timing Mode.........................:[Manual]
Memory Clock value or Limit.........:[DDR3 1333]
AMD KB Cool&Quiet control...........:  [Disabled]
CPU NB Vlotage......................:[Auto]
CPU Clock Ratio.....................: x17.0
CPU NB Clock Ratio..................: x9
HT Link Frequency...................: 1,800Mhz
CPU VId Special Add mv............:+75mv
DRAM Voltage Control..............: 1.837v
NB HT Voltage.......................:1.30v
NB Core Voltage.....................:1.40v
NB PCIE Voltage.....................:1.10v
SB PLL 1.2V Voltage.................:1.26v
Side Port Voltage...................:1.60v
O.C. Fail retry Counter.............:1
O.C. Fail CMOS Reload...............: [Disabled]
Spread Spectrum.....................: [Disabled]
CPU Host/HTT Boot Up Clock..........: 200
CPU HostHTT Clock...................: 224
CPU Host.HTT  Adjust Gap............: 5
PCIE Clock..........................: 103

**supershanks** · 09-06-2009 22:31

3.8Ghz 17.5x217 @1,333Mhz 1,487Mhz 6-6-6-18 1T Ganged
Seeing the relatively poor result of increasing ram speed by increasing Htt from 217 to 224 and dropping the half multi to maintain CPU clock of 3.8Ghz. I decided to try running ram Ganged at 1T.

Bench
On 1st run Wprime crashed the system, so upped CPU Vid from +75mv to +100mv which solved it.
Quite a lift in performance with the first sub 19minus Pi 32M.

Comparison:

Stability

Bios Settings

Code:

DFI LANPARTY JR 790GX-M3H5 
Note:There are 2 Bios modes Easy and Advanced Easy is default use [F9} for advanced items

(shown as *)
Genie Bios Settings
DRAM Configuration Sub Menu  [Press Enter ]
MCT Memory Timing  Sub Menu  [Press Enter ]
MCT Memory Timing...................: [Manual] 
2T Mode.............................:[Disabled] 
CAS Latency Time....................:6
Precharge delay (tRAS)..............: 18
DRAM RAS# Precharge.................:6
DRAM RAS#  to CAS# Delay............:6
Bank to Bank Cmd (TRRD).............: 4
TRC.................................:22
TRTP*...............................: 4
Write Recovery (TWR)*...............:8
Write-Read C'mand(TWTR)*............:4
TRFCO...............................: [110.0ns]
TRFC1 ..............................: [110.0ns]
TRFC2 ..............................: [110.0ns]
TRFC3...............................: [110.0ns]
Trdrd*..............................: [Auto]
TrwtTO*.............................:[Auto] 
Twrrd*..............................: [Auto]
Twrwr*..............................:[Auto]
ODC Control. Sub Menu  [Press Enter]
Output Driver Comp..................:[Auto]
Channel A
CPU On-die Termination..............:[240 ohms +/-20%]
DOS Drive Strength .................:[1.00x]
Data Drive Strength  ...............:[1.00x]
MEMCLK Drive Strength ..............:[1.00x]
Addr/Cmd Drive Streng...............:[1.50x]
CS/ODT Drive Strength...............:[1.50x]
CKE Drive Strength..................:[1.50x]
Channel B
DOS Drive Strength .................:[1.00x]
Data Drive Strength  ...............:[1.00x]
MEMCLK Drive Strength ..............:[1.00x]
Addr/Cmd Drive Streng...............:[1.50x]
CS/ODT Drive Strength...............:[1.50x]
CKE Drive Strength..................:[1.50x]
----------------------Dram Configuration--------------------------
DCTs Mode................................:[Ganged]
CKE base power down mode.........: [Enabled]
CKE based power down................: [Per Channel]
Memory Hole Remapping...............:[Enabled]
Auto Optimise Bottom IO..............:[Enabled]
Bottom of [31:24] IO Space.........:[D0]
Bottom of UMA  Dram [31:24].......:[FC]
------------------Main Genie Menu------------------------
HT Link Control  Sub Menu  [Press Enter ] 
HT Link Width *.....................:[Auto]
HI Link Tristate*...................:[Auto]
UnitiD Clumping.....................:[Auto] 
------------------Main Genie Menu------------------------
CPU Feature........... Sub Menu  [Press Enter ]
AMD ClE Support.....................:[Disabled]
Advanced Clock Calibration..........: [Disabled]
Value  (All Cores)) - ...............: -2%
x Value (Core 8)....................: -2% 
x Value (Core 2)....................: -2% 
x Value (Core 1)....................: -2% 
x Value (Core 3)....................:  -2% 
Secure Virtual Machine Mod..........: [Disabled]
AND Family lOH Down core............:[Quad]
AND CPU stepping....................: P0
------------------Main Genie Menu------------------------
Memory Current Value Mhz............: 1,446 Mhz.
Timing Mode.........................:[Manual]
Memory Clock value or Limit.........:[DDR3 1333]
AMD KB Cool&Quiet control...........:  [Disabled]
CPU NB Vlotage......................:[Auto]
CPU Clock Ratio.....................: x17.5
CPU NB Clock Ratio..................: [Auto]
HT Link Frequency...................: [Auto]
CPU VId Special Add mv............:+100mv
DRAM Voltage Control..............: 1.837v
NB HT Voltage.......................:1.30v
NB Core Voltage.....................:1.45v
NB PCIE Voltage.....................:1.10v
SB PLL 1.2V Voltage.................:1.26v
Side Port Voltage...................:1.60v
O.C. Fail retry Counter.............:1
O.C. Fail CMOS Reload...............: [Disabled]
Spread Spectrum.....................: [Disabled]
CPU Host/HTT Boot Up Clock..........: 200
CPU HostHTT Clock...................: 217
CPU Host.HTT  Adjust Gap............: 5
PCIE Clock..........................: 103

**supershanks** · 07-08-2009 16:50

3.9Ghz 19.5x200 @1,600Mhz 8-8-8-21
3.9Ghz on air ran but without stability, switching to water cooling allowed a stable 3.9Hhz clock

Bench
Wprime, Everest & SuperPi

Graphics

Stability

Bios Settings

Code:

DFI LANPARTY JR 790GX-M3H5 
Note:There are 2 Bios modes Easy and Advanced Easy is default use [F9} for advanced items

(shown as *)
Genie Bios Settings
DRAM Configuration Sub Menu  [Press Enter ]
MCT Memory Timing  Sub Menu  [Press Enter ]
MCT Memory Timing...................: [Manual] 
2T Mode.............................:[Disabled] 
CAS Latency Time....................:8
Precharge delay (tRAS)..............: 21
DRAM RAS# Precharge.................:8
DRAM RAS#  to CAS# Delay............:8
Bank to Bank Cmd (TRRD).............: 6
TRC.................................:30
TRTP*...............................: 6
Write Recovery (TWR)*...............:10
Write-Read C'mand(TWTR)*............:6
TRFCO...............................: [110.0ns]
TRFC1 ..............................: [110.0ns]
TRFC2 ..............................: [110.0ns]
TRFC3...............................: [110.0ns]
Trdrd*..............................: [Auto]3
TrwtTO*.............................:[Auto] 7
Twrrd*..............................: [Auto]2
Twrwr*..............................:[Auto]4
ODC Control. Sub Menu  [Press Enter]
Output Driver Comp..................:[Auto]
Channel A
CPU On-die Termination..............:[600 ohms +/-20%]
DOS Drive Strength .................:[1.00x]
Data Drive Strength  ...............:[1.00x]
MEMCLK Drive Strength ..............:[1.00x]
Addr/Cmd Drive Streng...............:[1.25x]
CS/ODT Drive Strength...............:[1.25x]
CKE Drive Strength..................:[1.25x]
Channel B
DOS Drive Strength .................:[1.00x]
Data Drive Strength  ...............:[1.00x]
MEMCLK Drive Strength ..............:[1.00x]
Addr/Cmd Drive Streng...............:[1.25x]
CS/ODT Drive Strength...............:[1.25x]
CKE Drive Strength..................:[1.25x]
----------------------Dram Configuration--------------------------
DCTs Mode................................:[UnGanged]
CKE base power down mode.........: [Enabled]
CKE based power down................: [Per Channel]
Memory Hole Remapping...............:[Enabled]
Auto Optimise Bottom IO..............:[Enabled]
Bottom of [31:24] IO Space.........:[D0]
Bottom of UMA  Dram [31:24].......:[FC]
------------------Main Genie Menu------------------------
HT Link Control  Sub Menu  [Press Enter ] 
HT Link Width *.....................:[Auto]
HI Link Tristate*...................:[Auto]
UnitiD Clumping.....................:[Auto] 
------------------Main Genie Menu------------------------
CPU Feature........... Sub Menu  [Press Enter ]
AMD ClE Support.....................:[Disabled]
Advanced Clock Calibration..........: [Enabled]
Value  (All Cores)) - ...............:0%
x Value (Core 8)....................: 0% 
x Value (Core 2)....................: 0% 
x Value (Core 1)....................: 0% 
x Value (Core 3)....................: 0% 
Secure Virtual Machine Mod..........: [Disabled]
AND Family lOH Down core............:[Quad]
AND CPU stepping....................: P0
------------------Main Genie Menu------------------------
Memory Current Value Mhz............: 1,600 Mhz.
Timing Mode.........................:[Manual]
Memory Clock value or Limit.........:[DDR3 1600]
AMD KB Cool&Quiet control...........:  [Disabled]
CPU NB Vlotage......................:[Auto]
CPU Clock Ratio.....................: x19.5
CPU NB Clock Ratio..................: [Auto]
HT Link Frequency...................: [Auto]
CPU VId Special Add mv............:+125mv
DRAM Voltage Control..............: 1.635v
NB HT Voltage.......................:1.37v
NB Core Voltage.....................:1.20v
NB PCIE Voltage.....................:1.12v
SB PLL 1.2V Voltage.................:1.30v
Side Port Voltage...................:1.60v
O.C. Fail retry Counter.............:1
O.C. Fail CMOS Reload...............: [Disabled]
Spread Spectrum.....................: [Disabled]
CPU Host/HTT Boot Up Clock..........: 200
CPU HostHTT Clock...................: 200
CPU Host.HTT  Adjust Gap............: 5
PCIE Clock..........................: 103

**supershanks** · 07-08-2009 17:13

4,000 20x200 @16,00 8-8-8-21

Continuing water cooling, increased mutiplier to 20x

Bench

Stability

Bios Settings

Code:

DFI LANPARTY JR 790GX-M3H5 
Note:There are 2 Bios modes Easy and Advanced Easy is default use [F9} for advanced items

(shown as *)
Genie Bios Settings
DRAM Configuration Sub Menu  [Press Enter ]
MCT Memory Timing  Sub Menu  [Press Enter ]
MCT Memory Timing...................: [Manual] 
2T Mode.............................:[Enabled] 
CAS Latency Time....................:8
Precharge delay (tRAS)..............: 21
DRAM RAS# Precharge.................:8
DRAM RAS#  to CAS# Delay............:8
Bank to Bank Cmd (TRRD).............: 6
TRC.................................:30
TRTP*...............................: 6
Write Recovery (TWR)*...............:10
Write-Read C'mand(TWTR)*............:6
TRFCO...............................: [110.0ns]
TRFC1 ..............................: [110.0ns]
TRFC2 ..............................: [110.0ns]
TRFC3...............................: [110.0ns]
Trdrd*..............................: [Auto]
TrwtTO*.............................:[Auto] 
Twrrd*..............................: [Auto]
Twrwr*..............................:[Auto]
ODC Control. Sub Menu  [Press Enter]
Output Driver Comp..................:[Auto]
Channel A
CPU On-die Termination..............:[60 ohms +/-20%]
DOS Drive Strength .................:[1.00x]
Data Drive Strength  ...............:[1.00x]
MEMCLK Drive Strength ..............:[1.00x]
Addr/Cmd Drive Streng...............:[1.25x]
CS/ODT Drive Strength...............:[1.25x]
CKE Drive Strength..................:[1.25x]
Channel B
DOS Drive Strength .................:[1.00x]
Data Drive Strength  ...............:[1.00x]
MEMCLK Drive Strength ..............:[1.00x]
Addr/Cmd Drive Streng...............:[1.25x]
CS/ODT Drive Strength...............:[1.25x]
CKE Drive Strength..................:[1.25x]
----------------------Dram Configuration--------------------------
DCTs Mode................................:[UnGanged]
CKE base power down mode.........: [Enabled]
CKE based power down................: [Per Channel]
Memory Hole Remapping...............:[Enabled]
Auto Optimise Bottom IO..............:[Enabled]
Bottom of [31:24] IO Space.........:[D0]
Bottom of UMA  Dram [31:24].......:[FC]
------------------Main Genie Menu------------------------
HT Link Control  Sub Menu  [Press Enter ] 
HT Link Width *.....................:[Auto]
HI Link Tristate*...................:[Auto]
UnitiD Clumping.....................:[Auto] 
------------------Main Genie Menu------------------------
CPU Feature........... Sub Menu  [Press Enter ]
AMD ClE Support.....................:[Disabled]
Advanced Clock Calibration..........: [Enabled]
Value  (All Cores)) - ...............: 0%
x Value (Core 8)....................:  0% 
x Value (Core 2)....................:  0% 
x Value (Core 1)....................:  0% 
x Value (Core 3)....................:  0% 
Secure Virtual Machine Mod..........: [Disabled]
AND Family lOH Down core............:[Quad]
AND CPU stepping....................: P0
------------------Main Genie Menu------------------------
Memory Current Value Mhz............: 1,600 Mhz.
Timing Mode.........................:[Manual]
Memory Clock value or Limit.........:[DDR3 1600]
AMD KB Cool&Quiet control...........:  [Disabled]
CPU NB Vlotage......................:[Auto]
CPU Clock Ratio.....................: x20.0
CPU NB Clock Ratio..................: [Auto]
HT Link Frequency...................: [Auto]
CPU VId Special Add mv............:+175mv
DRAM Voltage Control..............: 1.635v
NB HT Voltage.......................:1.37v
NB Core Voltage.....................:1.12v
NB PCIE Voltage.....................:1.20v
SB PLL 1.2V Voltage.................:1.30v
Side Port Voltage...................:1.60v
O.C. Fail retry Counter.............:1
O.C. Fail CMOS Reload...............: [Disabled]
Spread Spectrum.....................: [Disabled]
CPU Host/HTT Boot Up Clock..........: 200
CPU HostHTT Clock...................: 200
CPU Host.HTT  Adjust Gap............: 5
PCIE Clock..........................: 103

Thread: DFI LANPARTY JR 790GX-M3H5 Living Review

TRFC0~TRFC3 settings

3.8Ghz 17.5x217 @1,333Mhz 1,487Mhz 6-6-6-18

3.8ghz 17x224 @1,333Mhz 1,493Mhz 6-6-6-18

3.8Ghz 17.5x217 @1,333Mhz 1,487Mhz 6-6-6-18 1T Ganged

4,000 20x200 @16,00 8-8-8-21

LinkBacks (?)

Tags for this Thread

Posting Permissions