Foxconn Mars Living Review

[supershanks]

shoukd be ok with the paste.
just used a Philips screwdriver & a pair of needle nose pliars to remove the push pins.

[grungero]

Thanks!



Doin' fine!

[tonschk]

Hello , i have this Foxconn mobo , the only problem i got is the Aegis Panel dont want to show me the temps of the northbridge and system , only can see the temp of CPU ,I changed to another CPU to check , but also with the other CPU is the same problem ,only can see the temps of CPU ,and the RPM of the fans in that Aegis Panel are not much realistic

[supershanks]

Hi tonschk,
Welcome to the forum.
Aegis runs CPU temp by reading the analogue sensor. This can't read the temps of the individual cores. Your best off using realtemp as you are doing.

I'm suprised that you can't see system Temp and Northbridge.As you saw they appear in the version I have here, what version are you using ??



luck

[tonschk]

Hello , thank you very much for your answer , i swap with another processor , a pentium D , but the same as before , Aegis Panel only show the temp of CPU , I contact Foxconn channel and they have no idea about this problem , this is my PC , i have build myself a few months ago , you can see the version of Aegis Panel in my previous screenshot

[supershanks]

As I said aegis uses the the analogue sensor shown here in everest.



As you can see from abiove there are 3 CPU sensors (for a 2 core CPU) The 2 shown in the picture are the digital core sensors used by realtemp.

Aegis is NOT set up /programmed to monitor core temps just the analogue temp sensor. So as I said earlier if you want to ttrack your cores use realtemp not aegis.

It's really not a big deal.

[tonschk]

Thank for your help , I dont have problems with the readings of the core or CPU temperatures , I have only problems because Aegis Panel dont want to show me the temp of the MotherBoard and dont want to show me the temp of the System , i already update the Aegis Panel utility , but with the same result ,

I was checking about the updates and i saw that are available BIOS updates , I dont know if I want to allow the BIOS updates , can you tell me if is necessary to update the BIOS ? , thank you

[Kelainefes]

I don't own this board, but could this be a driver issue?
Have you any unknown devices in your hardware panel?

[tonschk]

Originally Posted by Kelainefes

I don't own this board, but could this be a driver issue?
Have you any unknown devices in your hardware panel?

Hello , I dont understand your question , how can i check if i have unknown devices in my hardware panel ?

[supershanks]

Hello , I dont understand your question , how can i check if i have unknown devices in my hardware panel ?

Windows Device Manager Are there any unknown devices marked with a ? or any devices not functioning properly shown in yellow

Have you tried Sisoft Sandra