DFI UT P45-T3RS Living Review

[Darkside_86]

Originally Posted by supershanks

can manage the railway station as well so I can get to the pub and back

Hehe no comment

And stay tuned. Now I wish you all a good night and I will let you know if I had a new Overclock stable

[supershanks]

Will do Gute Nacht

[SNiiPE_DoGG]

Hey Super, Have you used the new beta bios yet? did it give any improvements?

currently my ram clocking is very poor with unstable straps... I know the board can do amazing FSB but the ram straps are holding me back like crazy.

[supershanks]

Hi SNIPE,
No not tried it Have run all above with the previous BTA. Will give it a turn, though I've put my E8600 in the UD3R which I'm currently testing. The 400 strap playing up as well ? that's been the best out the bunch for me.

Edit:
Tried from BTA section:-
LP45DC12.exe d.2008-12-12 must be a dodgy link , when I tried to flash it says it's not compatible.

[Darkside_86]

Hi SNiiPE DoGG
I`ve flashed the Bios from 12.12 last monday and have no problems with this Bios.
BUT after flashing in Windows I´ve got a Bluescreen (Bad pool error). Ive also flashed this Bios by a mate with a UT P45 T2RS and got the same error after flashing.
After a reboot and Bios default loading was all ok.

At the last site you can see my 24/7 setting. Try the 333 strap-set the TRFC to 60, Performancelevel to 10, Rcomp to 1-1-1 and keep pushing
GTL-tuning @prime large is a duty

Hope that it worked

@Supershanks: A small piece of Stability

[supershanks]

@Supershanks: A small piece of Stability

That looks great man

[Darkside_86]

Thanks
But I don`t get 448k stable





But 478*9 run ist prime large stable. Now I try small FFT

Small FFT is also stable

[SNiiPE_DoGG]

hmmm I have just seen your tips darkside, thankyou very much, I will try these settings tonight

[Darkside_86]

Hope that it worked well

I had a new 24/7 setting 100% small, large and blend stable.



The Ram settings are much stronger then my old 4,3 Ghz setting. Enhance Data transmissing to fast, Enhance addressing to fast, the Ch1 and Ch2 Crossing settings to Aggressive and the PL to 8 brings a lot of Performance and also I need lower Voltages.

But the Board is also able to do 4,4 Ghz primestable after a lot of tweaking(in the last few days I had no time to occupy me with the new One). And the Vcore is also too high for 24/7



But I think it is possible

[Dahaka]

Hi!.

This is my first post here, very good forum and one of the few that works with DFI.

Last night arrives my DFI UT P45 T3RS and i got this SS.



Some one get the 600FSB?.