Asus Maximus Formula SE X38 - Living Review. - Page 50

fatty5000 · #**491** 04-11-2007, 02:05

Quote:

Originally Posted by Clunk

Dunno about the temps, is it a B3? or is your Vcore on auto?

Yes Vcore on auto and it's a G0 stepping

Clunk · #**492** 04-11-2007, 02:11

looks fine to me then. You can experiment with lowering the vcore once you are stable

RevolutionX · #**493** 04-11-2007, 02:14

Quote:

Originally Posted by Clunk

Excellent

What revision is your board?

good old rev 1.02G

ok i found some issues on this board @ high fsb now
@ FSB 479 the Soutbridge Voltage Beginns to fluctuate 1.26V to 1.25V @ 478 no problem!
@ FSB 485 the Soutbrige and the Nortbridge Voltage begins to fluctuate Sb 1.26 to 1.25 and NB 1,86 to 1,85 and a Vdrop to the NB to 1.85V @ Memtest

later more ,...

Someone else can test thise?

purecain · #**494** 04-11-2007, 02:27

where is the revision printed on the board....... cant see it....

Clunk · #**495** 04-11-2007, 02:46

Quote:

Originally Posted by purecain

where is the revision printed on the board....... cant see it....

MAXIMUS FORMULA rev 1.02G

Where it says that

fatty5000 · #**496** 04-11-2007, 02:54

Clunk whats the bog standard vcore setting mate

Clunk · #**497** 04-11-2007, 03:09

Depends on your CPU...put it to stock and boot to windows and load up something like coretemp that shows your VID.

jorgito05 · #**498** 04-11-2007, 03:25

Quote:

Originally Posted by Clunk

MAXIMUS FORMULA rev 1.02G

Where it says that

Clunk Help me out here;

QX6850 1333 fsb using mem that I think is realy 400MHz:
KHX6400D2ULk2/2G
DDR2 800MHz at low latency timing of 3-3-3-10 at 2.3-2.35V. The SPD is
programmed to JEDEC standard latency 800Mhz timing of 5-5-5-15 at 1.8V

what do I need to do to get a cpu that runs at 333 to run 1:1 with mem.

Please help me