Difficulty overclocking Q9550 on P5Q Pro

[Kaz]

Ahhh, it's no bother really, just a copy paste job to get the template ;D

Configure System Performance Settings

Ai Overclock Tuner - Manual
CPU Ratio Setting - 8.5
FSB Frequency - 380
PCIE Frequency - 100
FSB Strap to Northbridge - 333
DRAM Frequency - DDR2 - 801MHz
DRAM Timing Control - Manual

1st Information : 5-5-5-15-5-54-6-3
CAS# Latency -5
DRAM RAS# to CAS# Delay - 5
DRAM RAS# Precharge - 5
DRAM RAS# Activate to Precha - 18
RAS# to RAS# Delay - Auto
Row Refresh Cycle Time - Auto
Write Recovery Time - Auto
Read to Precharge Time - Auto

2nd Information : 7-3-5-4-5-4-6
Read to Write Delay (S/D) - Auto
Write to Read Delay (S) - Auto
Write to Read Delay (D) - Auto
Read to Read Delay (S) - Auto
Read to Read Delay (D) - Auto
Write to Write Delay (S) - Auto
Write to Write Delay (D) - Auto

3rd Information : 14-5-1-6-6
Write to Pre Delay - Auto
Read to Pre Delay - Auto
Pre to Pre Delay - Auto
All Pre to Act Delay - Auto
All Pre to Ref Delay - Auto

DRAM Static Read Control - Disabled
DRAM Read Training - Disabled
MEM. OC Charge - Disabled
Ai Clock Twister - Auto
Ai Transaction Booster - Auto

CPU Voltage - 1.3
CPU GTL Reference - Auto
CPU PLL Voltage - Auto
FSB Termination Voltage - Auto
DRAM Voltage - 2.16
NB Voltage - 1.4
SB Voltage - Auto
PCIE SATA Voltage - Auto

Load-Line Calibration - Auto
CPU Spread Spectrum - Auto
PCIE Spread Spectrum - Auto
CPU Clock Skew - Auto
NB Clock Skew - Auto
CPU Margin Enhancement - Optimized

CPU Settings

CPU Ratio Setting - 8.5
C1E Support - Disabled
Max CPUID Value Limit - Disabled
Intel Virtualization Tech - Disabled
CPU TM Function - Enabled
Execute Disable Bit - Disabled

Chipset Settings - Northbridge Settings

Memory Remap Feature - Enabled
Memory Hole - Disabled 

[Kelainefes]

Aw, i meant the template with the settings that are not stable yet, if those posted are ok now with the fan on the TRUE, tell us where you wanna get and what you tried already (ie, post a template where you try to get to 3.3 or 3.4, but not stable yet).

[death]

 
Configure System Performance Settings
 
Ai Overclock Tuner - Manual
CPU Ratio Setting - 8.5
FSB Frequency - 454
PCIE Frequency - 100
FSB Strap to Northbridge - 333
DRAM Frequency - DDR2 - 1068MHz
DRAM Timing Control - Manual
 
1st Information : 5-5-5-15-5-54-6-3
CAS# Latency -5
DRAM RAS# to CAS# Delay - 5
DRAM RAS# Precharge - 5
DRAM RAS# Activate to Precha - 18
RAS# to RAS# Delay - Auto
Row Refresh Cycle Time - Auto
Write Recovery Time - Auto
Read to Precharge Time - Auto
 
2nd Information : 7-3-5-4-5-4-6
Read to Write Delay (S/D) - Auto
Write to Read Delay (S) - Auto
Write to Read Delay (D) - Auto
Read to Read Delay (S) - Auto
Read to Read Delay (D) - Auto
Write to Write Delay (S) - Auto
Write to Write Delay (D) - Auto
 
3rd Information : 14-5-1-6-6
Write to Pre Delay - Auto
Read to Pre Delay - Auto
Pre to Pre Delay - Auto
All Pre to Act Delay - Auto
All Pre to Ref Delay - Auto
 
DRAM Static Read Control - Disabled
DRAM Read Training - Disabled
MEM. OC Charge - Disabled
Ai Clock Twister - Auto
Ai Transaction Booster - Auto
 
CPU Voltage - 1.33
CPU GTL Reference - Auto
CPU PLL Voltage - 1.6
FSB Termination Voltage - 1.4
DRAM Voltage - 2.16
NB Voltage - 1.6
SB Voltage - Auto
PCIE SATA Voltage - Auto
 
Load-Line Calibration - Auto
CPU Spread Spectrum - Auto
PCIE Spread Spectrum - Auto
CPU Clock Skew - Auto
NB Clock Skew - Auto
CPU Margin Enhancement - Optimized
 
CPU Settings
 
CPU Ratio Setting - 8.5
C1E Support - Disabled
Max CPUID Value Limit - Disabled
Intel Virtualization Tech - Disabled
CPU TM Function - Enabled
Execute Disable Bit - Disabled
 
Chipset Settings - Northbridge Settings
 
Memory Remap Feature - Enabled
Memory Hole - Disabled

this my max so far