Getting E6550 stable @ 3.5

vaporATX · #1 18-05-2008, 15:11

I have it runnning stable at 3.4 with the following:

FSB : 485
vCore : 1.3v
NB : +0.1v
VTT : stock
Temps I/L : 34c/58c

Memory is good up to 500, tested that. Anything over 485 and I start getting bsods. I tried bumping the VTT bit, but this made no difference. I started incrementally going up on the vcore but saw no difference all the way up to 1.4v. Any ideas? Board is a Gigabyte EP35-DS3R.

Clunk · #2 18-05-2008, 15:20

Vcore and NBcore

vaporATX · #3 18-05-2008, 15:31

Yeah, I know, It's just been so long since I messed with an air cooled board that I tend to baby them.

Clunk · #4 18-05-2008, 15:56

Sorry, I thought you were asking for help.

vaporATX · #5 18-05-2008, 16:15

Yes, I am. It's just I don't know much about this chip. I thought it might have a nasty fsb wall I didn't know about. Bumping the NB another .1v seems to have cured it. I'm just trying to keep the voltages as low as possible.