Voltage Measuring Guide

[supershanks]

Voltage Measuring Points - Asus Commando


1) VCORE & VDIMM


2) DDR2 Termination Voltage


3) Southbridge Voltages


4) Northbridge Voltage

Pictures Copyright Dani
& Chri$ch

[supershanks]

Abit IX38 QuadGT

1) VCORE


2) VDIMM


VTT

[kinnsy]

A thing that may make it easier to measure on the regulators. Those 3 pin regulators that have the centre leg cut off you will usually find that they are connected internally to the metal base plate that is soldered to the motherboard, the bit with little metal tab sticking out on the opposite side of the legs. I think the ones that look like they only have two legs are the same. This can make it a bit safer to measure off those.

[supershanks]

DFI UT X48-T3RS Voltage Measuring Points

[GSte]

Can we put requests for specific boards in here?

[supershanks]

Well you can do , but we can only really put up the boards we have or review , or see shown elswhere. It might be a real don't hold your breath post I have been trying to collect them together as a resource for people though, it can be a pia googling around when you want to find them, I talk from experience

[GSte]

Originally Posted by supershanks

I have been trying to collect them together as a resource for people though, it can be a pia googling around when you want to find them, I talk from experience

Aye, that's why I was asking mate . Seen a P5B Deluxe one somewhere before, but can I find it now? Can I bugger..... an IP35 Pro one would be handy too mate...... if I find one though I'll add it to your thread if you don't mind.

[supershanks]

Yes that's the other reason for doing this thread , my own selfish benefit. At least having poste therm here I know where they are . So fel free to add any you find, I'll add a link to them from post#1
no worries

[supershanks]

Added Gigabyte GA-X48T-DQ6, will most likely work with ddr2 version.

[Salty]

Is there anyone who knows where the GTL measuring points are on a GA-X38/X48 mobo? (Or how to locate them?)