Gigabyte X48T DQ6 Living Review - Page 10

Ace-a-Rue · #91 09-04-2008, 18:26

cellshock is just some serious performing memory!...i am a believer...i doubt if i could even approach that with my GSkill DDR-1600 memory...i wonder if there will be a decrease in performance once they come out with 2 x 2gb sticks....my understanding, they only make the 2 x 1gb sticks currently..correct???

supershanks · #92 09-04-2008, 18:49

Cellshock Yes they only do 2gb DDR3 kits. I think there usually is a performance hit 4Gb v 2Gb , though the gap is probably being eroded.

supershanks · #93 09-04-2008, 20:20

Quote:

it was the 'yankee' in me to spoof you on the 7X multi...hehehe...i gathered that it was the 8X multi.

Sorry I missed that this am , can't have been awake yet

Ran Prime overnight 9.5Hr Prime stable

supershanks · #94 09-04-2008, 21:45

Tried 7-7-7-12 at 1700Mhz again using the 3.33D strap/divider. 511x7.5

Click to Enlarge

Bios Settings

Code:

GIGABYTE GA X48T DQ6 Clock Settings

MB Intelligent Tweaker (MIT)
Robust Graphics Booster...........: Turbo
CPU Clock Ratio...................: 7.5
CPU Frequency.....................: Manual
CPU Host Clock Control............: 3,825Mhz
CPU Host Frequency(Mhz)...........: 510mhz
PCI Express Frequency (Mhz).......: 104Mhz
C.I.A.2...........................: Disabled
Performance Enhance...............: Turbo
System Memory Multiplier (SPD)....: 3.33D
Memory Frequency(Mhz).............: 1,700Mhz
DRAM Timing Selectable ...........: Manual
Standard Timing Control
CAS Latency Time (tCL)............: 7
DRAM RAS# to CAS#  (tRCD).........: 7
DRAM RAS# Precharge (tRP).........: 7
Precharge Delay (tRAS)............: 12
Advanced Timing Control
ACT to ACT Delay(tRRD)............: 5
Rank Write to READ Delay (tWTR)...: 5
Write To Precharge Delay (tWR)....: 10
Refresh to ACT Delay (tRFC).......: 60
Read To Precharge Delay (tRTP)....: 5
Static tREAD Value (tRD)..........:8
Static tREAD Phase Adj............: Auto
Command Rate (CMD)................: 1N
Clock Driving and Skew Control
CPU/PCIEX Clock Driving Control...: 800mV
CPU Clock Skew Control............:  Normal
(G)MCH Clock Skew Control.........: Normal
System Voltage Control () = Base Voltages
DDR3 OverVoltage Control...(1.50v): +0.35v
PCI-E OverVoltage Control.,(1.50v): +0.10v
FSB OverVoltage Control....(1.10v): +0.20v
(G)MCH OverVoltage Control,(1.45v): +0.30v
CPU GTLREF1 Voltage*.......(67%)..: Auto
CPU GTLREF2 Voltage*.......(61%)..: Normal
Loadline Calibration..............: Auto
CPU Voltage Control...............: 1.33125
Normal CPU Vcore..................: 1.1175
Note: * Hidden Features Press [CTRL] + [F1] from main Menu to Access
Advanced Bios Features
CPU Multi-Threading...............: Disabled
Limit CPUID Max to 3..............: Disabled
No-Execute Memory Protect.........: Disabled
CPU Enhanced Halt(CIE)............: Disabled
CPU Thermal Monitor 2.............: Enabled
CPU EIST Function.................: Disabled
Virtuaalization Technology........:  Disabled

Ace-a-Rue · #95 09-04-2008, 23:37

Quote:

Originally Posted by supershanks

Sorry I missed that this am , can't have been awake yet

that's 'ok' mate, i understand the complications from deprived sleep

Quote:

Ran Prime overnight 9.5Hr Prime stable

do-ya think that you could round that up to 10 hours

actually, nice show!

supershanks · #96 10-04-2008, 00:16

Quote:

do-ya think that you could round that up to 10 hours

it's the accountant in me

Think those 6-6-6-12 are a bit out of line when you look at this it highlights the low 1600Mhz copy that you spotted

I think of course it's probably down to the fairly arbitary speeds i've selected. None , have been tested as being the max speed for those timings. I've a feeling looking at the results that the 480x7.5 @3.33D could be pushed a bit further ?. There's only really the read bench that shows any linearity with the other 2 speeds.